Votos - 5, Puntuación media: 4 ( )

Fabricar: Sony Tamaño del archivo: 164.26 kb Nombre del archivo: AP-1.pdf Idioma del manual:

AP-1 FEATURES RECEIVER INSTALLATION ANTENNA INSTALLATION ELECTRICAL CONNECTIONS ® TRANSMITTER NUMBER ACCESS GRANTED POWER EARTH GND OPEN REQUEST ACCESS RELAY OBSTACLE RELAY POWER INPUT 12-24 VAC/VDC SUSPENDED OCCUPIED RADIO N.C. COM N.O. N.C. COM N.O. TRANSMITTER NUMBER ACCESS GRANTED POWER EARTH GND OPEN REQUEST ACCESS RELAY OBSTACLE RELAY POWER INPUT 12-24 VAC/VDC SUSPENDED OCCUPIED RADIO N.C. COM N.O. N.C. COM N.O. MOUNTING SCREWS F-81 CONNECTOR NUT AND LOCKWASHER TRANSFORMER 3-FOOT ANTENNA CABLE WHIP ANTENNA ACCESSPRO MODEL AP-1 RECEIVER TERMINAL STRIP For connection of earth ground, power and open request inputs plus access and obstacle relay outputs. DIGITAL DISPLAY Displays transmitter numbers during operation and programming. Also displays MGT supervision status and system utility information. ACCESS GRANTED INDICATOR SUSPENDED INDICATOR OCCUPIED INDICATOR RADIO INDICATOR NUMERIC KEYPAD Lights when the access or obstacle relay is energized. Lights when a signal is received from a transmitter that has been suspended from use. Lights when the displayed memory location is occupied. Blinks during transmitter learn cycle and before transmitter is deleted. Lights when a radio signal is detected on the frequency to which the receiver is tuned. For entering memory location numbers and utility function numbers. Displays the number of the last transmitter activated or subtracts 1 from the displayed number. POUND (#) KEY SUSPEND BUTTON LEARN BUTTON DELETE BUTTON POWER INDICATOR ANTENNA CONNECTOR Push after entering transmitter number to start learn cycle. To complete the cycle, activate a transmitter while occupied light is blinking. Lights when AC or DC power is applied to the unit. For direct connection to the local whip antenna or, with coax cable, to the remote antenna. Push once after entering the transmitter number to delete. Press again while the occupied light is blinking to delete selected transmitter from memory. Push to activate the access relay. Also clears any supervisory trouble codes from MGT transmitter. Adds 1 to the displayed number. Also press # then 1-5 for utility functions: #-1 Displays MGT supervisory status. #-2 Displays number of empty memory locations. #-3 Displays number of occupied memory locations. #-4 Displays first available memory location. #-5 Displays firmware version number. STAR (*) KEY OPEN BUTTON Prevents selected transmitter from activating the access relay but does not remove it from memory. MOUNT RECEIVER USING THE FOUR SCREWS PROVIDED 1. Mount receiver in an area protected from the elements. 2. If using the local whip antenna, the higher the receiver is mounted, the better the radio range will be. 3. Optionally, mount the receiver in a metal cabinet and use an external antenna. Attach local whip antenna directly to receiver. Bend whip to point antenna up. LOCAL ANTENNA Mount F-81 connector on surface using lockwasher and nut. Connect to receiver with coax cable and screw whip antenna to connector. REMOTE ANT...

Descargar ahora

Introduzca dos números de la imagen: