Use la lijadora de pisos solamente en una zona bien ventilada. • No permita que se use como juguete. Es necesario poner mucha atencion cuando la usen los ninos o cuando se use cerca de ellos. • No deje el aparato sin atender cuando este conectado. Desconectelo de la toma de corriente cuando no este en uso y antes de darle servicio. • Usela solamente como se describe en este manual. Utilice solamente los aditamentos recomendados por el fabricante. • No la use con el cordon o clavija danados. Si l

Construction and Colors Color and pattern detail are dispersed uniformly throughout the thickness of the material. Color pigments are insoluble in water and resistant to cleaning agents and light. Size 12 in. x 12 in. (305 mm x 305 mm) tile Gauge (nominal thickness) 1/8. (3.2 mm) Limitations These products should not be used in the following areas: ¦ Hospital operating rooms. ¦ Heavy industrial and exterior areas. ¦ Commercial kitchens and commercial food processing areas. ¦ Where pointed spikes

Initial Maintenance Immediately After Installation ¦ Sweep or vacuum thoroughly. ¦ Damp mop with a dilute neutral detergent solution such as Armstrong S-485 Floor Cleaner – carefully wiping up black marks and excessive soil. ¦ Apply two coats of high quality commercial floor polish such as Armstrong S-480. ¦ Do not wash, scrub or strip the floor for at least four to five days after installation. Preparation for Commercial Use For specific, ongoing maintenance procedures see Armstrong Maintenance

NOTE: Install each ARTEFFECTS tile with the arrows pointing in the same direction for a nondirectional look. Detailed instructions may be found in the Armstrong Guaranteed Installation Systems manual, F-5061. MAINTENANCE These products are designed to be maintained by traditional resilient flooring maintenance methods, which include the use of polishes, spray-buffing techniques and appropriate high–speed maintenance systems. Initial Maintenance Immediately After Installation ¦ Sweep or vacuum th

SDT dissipates static charges away from people and equipment in order to increase personal comfort and safety and help prevent sensitive equipment damage. In addition to static control, SDT offers the practical benefits of VCT, including durability, ease of maintenance and low installed cost. Post-installation electrical properties can be evaluated by a qualified third party. Contact your Armstrong representative for details. SDT is styled and constructed for use in light industrial, education a

per cu. ft. (1441 kg/m3) or cellular concrete having a plastic (wet) density less than 100 lbs. per cu. ft. (1602 kg/m3) [94 lbs. per cu. ft. (1506 kg/m3) dry weight], or concrete having a compressive strength of less than 3500 psi (24 MPa). Concrete slabs with heavy static and/or dynamic loads should have higher design strengths and densities calculated to accommodate such loads. Concrete curing agents, sealers, hardeners, or parting agents should be removed. TECHNICAL DATA Shipping Weight 63 l

• Fresh, earth-based colors and tinted neutrals provide an array of patterning options. • Visual portrays the textural dimension and softness of carpet with maintenance benefits of vinyl. • The nondirectional pattern design conveys a seamless, sheet-like appearance with the easy installation and replacement advantages of tile. 57215 zinc white 57200 parchment beige 57204 pissarro cream 57202 canvas beige 57203 pastel beige 57205 silver sable 57211 mezzo green intaglio gray 57201 silverpoint 5720

These existing in-place products may contain asbestos fibers and/or crystalline silica. Avoid creating dust. Inhalation of such dust is a cancer and respiratory tract hazard. Smoking by individuals exposed to asbestos fibers greatly increases the risk of serious bodily harm. Unless positively certain that the existing in-place product is a non-asbestos-containing material, you must presume it contains asbestos. Regulations may require that the material be tested to determine asbestos content and

GENERAL INFORMATION (NEW SUBFLOORS OR RENOVATION) The subfloor must be absolutely hard, level, dry, smooth and structurally sound. The subfloor must be free of cracks and other irregularities and must not be contaminated with paint, plaster, oil, grease or any other substance which could affect adhesion. Cracks must be filled with an appropriate material. The following information provides you with basic installation procedures. For technical products or more detailed instructions please refer t

CENTIVA LUXURY FLOORING CONTENTS Introduction-------------------------------------------------------------------------------------------------------------2-3 Product Characteristics -----------------------------------------------------------------------------------------------4-5 Product Specifications -----------------------------------------------------------------------------------------------6-10 Product Installation Guidelines Proper Subfloor Preparation ------------------------------------