When the battery charge gets low, the batteries supply less power to the motors, which causes the motors to spin slower. • Determine the temperature of the power chair at the time the problem occurred. The Jazzy 1170XL electrical system will protect itself from overheating when its internal temperature gets too high by reducing the amount of power sent to the motors. When this happens, the power chair will gradually slow to a stop. Allow the power chair to cool down and it will resume normal ope

Many of these problems occur because the batteries are not fully charged or because the batteries are worn down and can no longer hold a charge. Below are a series of basic troubleshooting instructions for the Jazzy 1107 Power Chair. This information is to be used as a supplement to the troubleshooting instructions provided in the owner’s manual. If you have any questions about this information, contact your authorized Pride Provider. What if the systems on my Jazzy 1107 seem to be "dead" (contr

1108705, 1069956 Assembly, Installation and Operating Instructions Yes, you can: _SAVE THESE INSTRUCTIONS_ NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact Carrier/Dealer for further instruction. SAFETY SUMMARY T o ensure the safe installation, operation and use of the MPR T ray Assembly Kit, these instructions MUST be followed: GENERAL WARNING DO NOT install or use this equipment without first reading and understanding these instructions. If you

1123847 1 MPR Tray Assembly Kit 6. Secure the pivot arm and two (2) tray tabs to the tray with four (4) flange screws. Securely tighten flange screws. Repeat for support arm. 7. Insert pivot arm and support arm into recliner frame underneath armrests. Flange Screws FIGURE 1 - REPLACING THE TRAY - MODEL 6905A Invacare Corporation USA One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 Canada 570 Matheson Blvd E Unit 8 Mississauga Ontario L4Z4G4 Canada 800-668-5324 Invacare is a