Votos - 4, Puntuación media: 4.3 ( )

Fabricar: Antec Tamaño del archivo: 237.07 kb Nombre del archivo: 2920fc6b-cf78-4eb2-9471-23ee361f6222.pdf Idioma del manual:

This includes dual 12V output circuitry that delivers safer and more reliable output to your system's components, as well as higher energy efficiency, which reduces power consumption by up to 25%, saving you money on your electricity bill. In addition we've included a variety of industrial-grade protective circuitry: OCP (over current protection), OPP (over power protection), OVP (over voltage protection), UVP (under voltage protection), and SCP (short circuit protection). This power supply is backwards-compatible with previous ATX form factor power supplies. To make sure you connect your power supply properly, please refer to the user manuals supplied with your motherboard and peripherals before connecting any of them to the power supply. Quiet Computing and Hybrid Fan operation SmartPower 2.0 features an innovate design to help decrease noise during normal use, but which still allows for superior cooling capabilities as loads increase. To this end SmartPower 2.0 features both an internal intake fan as well as a unique external exhaust fan. The internal intake fan operates when the power supply is turned on. It rotates slowly to blow out the hot air from the power supply and case, and is thermally controlled, speeding up as heat increases. The external exhaust fan remains off to make sure your computer maintains a quiet computing environment until the power supply senses the required temperature to turn on the external exhaust fan. We've also included a 3-pin fan signal connector. Connect it to one of the fan connectors on your motherboard. You can monitor the speed of the internal intake fan through your motherboard BIOS or through the monitoring software included with your motherboard. Note: When temperatures are low, the speed of the fan may drop below 950RPM. At such low speeds, some motherboards may not be able to properly detect the fan speed and may generate false warning of fan failure. To ensure proper fan monitoring, please refer to your motherboard manual. Active Power Factor Correction (applicable only to models designed for sale in the European Union): SmartPower 2.0 models designed for the EU include Power Factor Correction (PFC) circuitry in accordance with European standard regulation code EN61000-3-2. Power Switch: This power supply comes with a main power switch. Make sure you turn the switch to the ON ( I ) position before you boot up your computer for the first time. In normal operation there is no need to turn the switch to the OFF (O) position since the power supply is equipped with a soft on/off feature which turns your computer on and off through the soft switch on your computer case. You may need to turn the switch to the OFF position occasionally should your computer crash and you cannot shut it down through use of the soft switch. Installation: 1. Disconnect the power cord from your old power supply. 2. Open your computer case. Follow the directions provided in your case manual. 3. Disconnect all power connectors from the motherboard and from the peripherals devices such as case fans, hard drives, optical drives, floppy drives, etc. 4. Remove the existing power supply from your computer case and replace it with your new Antec power supply. 5. Note (NOT applicable to models designed for the European Union): Before you install 2 your new power supply, check the red power supply voltage switch setting. It should match your local power voltage (115V for North America, Japan, etc., 230V for Europe, South East Asia, and many other countries). Change the voltage setting if necessary. If you use the wrong voltage setting, you could damage your system and void your warranty. 6. Connect the 24-pin Main Power Connector and the Picture 1 Picture 2 4-pin +12V connector to your motherboard as needed. If your motherboard uses a 20-pin connector, detach the 4-pin attachment on the 24-pin power connector (see pictures 1 and 2). 7. Connect the peripheral power connectors to devices such as hard drives, optical drives, etc. 8. Connect the Serial ATA connectors if you are using For 24-pin For 20-pin motherboards motherboards Serial ATA hard drives. 9. Connect the PCI Express power connector to your PCI Express graphic card as needed. 10. Optional: If you'd like to monitor the speed if the power supply fan, connect the 3-pin fan signal connector to one of the fan connectors on your motherboard. Note: You don't need to connect the fan signal connector in order for the power supply to work. 11. Close your computer case and connect the AC power cord to the power supply. Product Specifications For detailed specifications, please visit our website at 3 Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 Tel: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands Tel: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 Technical Support US & Canada 1-800-22ANTEC CustomerSupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.ante...

Descargar ahora

Introduzca dos números de la imagen: