Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
SHREDDERS Model Numbers 243-645B000 243-648B000 243-650B000 243-651B000 IMPORTANT! Record the Model No. and Mfg. Code which appear on your unit in the space below. You must have these numbers, along with the date of purchase, in order to receive warranty or service. Important: Read Safety Rules and Instructions Carefully WARNING: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 360900, Cleveland, Ohio 44136. Made in AMERICA MEETS ANSI SAFETY STANDARDS MODEL NO. MFG. CODE FORM NO. 770-8162H S/iFETY RULES A WARNING: TO REDUCE THE POTENTIAL FOR ANY INJURY, COMPLY WITH THE FOLLOWING SAFETY INSTRUCTIONS. FAILURE TO COMPLY WITH THE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. TRAINING • Read this owner’s manual carefully in its entire ;y before attempting to assemble or operate this machine. Be completely familiar with the controls and the proper use of this machine before operating it. Keep this maiual in a safe place for future and regular reference and lor ordering replacement parts. • Children must never be allowed to operate th s equipment. • No one should operate this unit while intoxicatec or while taking medication that impairs the senses or reac tions. • This equipment should never be operated in tha vicinity of children, pets or other persons. • Never run your machine in an enclosed arei as the exhaust from the engine contains carbon monoxide, which is an odorless, tasteless and deadly poisonous g£ s. • Never place your hands or any part of your body or clothing inside the feeding chamber, discharge chute, or near any moving part while the machine or engine is r jnning. • If it is necessary for any reason to inspect or repair the feeding chamber or any part of the machine whers a moving part can come in contact with your body or clothing, stop the machine, allow it to cool, disconnect tne spark plug wire from the spark plug and move it away from the spark plug before attempting such inspection or repair. PREPARATION • Wear safety glasses provided with your unit whil<} operating the shredder to prevent injury from any material which may be ejected out of the openings. • Wear proper apparel. Avoid wearing loose fitting clothing. Wear gloves when handling material. • HANDLE GASOLINE WITH CARE as it is an extremely flammable fuel. • Check the fuel before starting the engine. Do n }t fill the fuel tank indoors, while the engine is running, or /vhiie the engine is still hot. Turn the unit off and let the engine cool before refueling. • Fuel your shredder in a clean area. Do not smoke while refueling. • Fuel tank cap must be secure at all times except during refueling. • Avoid spilling gasoline or oil. Wipe the unit clean of any spilled fuel or oil. • Store fuel and oil in approved containers, away frpm heat or open flame, and out of reach of children. • This machine should be operated only upon a level surface. • Assure that all screws, nuts and bolts and other f isteners are properly secured. OPERATION • When feeding shreddable material into this equipment, be extremely careful that pieces of metal, rocks; bottles, cans or other foreign objects are not included. Personal injury or damage to the machine could result. • if the cutting mechanism strikes any foreign object or if your machine should start making an unusual noise or vibration, immediately stop the engine, disconnect the spark plug wire from the spark plug and move it away from the spark plug. Allow the machine to stop and take the following steps: Inspect for damage. Replace or repair any damaged parts. Check for any loose parts and tighten to assure continued safe operation. • The engine must be kept clean of debris and other accumulations. • Do not allow an accumulation of processed material to build up in the discharge area as this will prevent proper discharge and can result in kick-back from feed opening. • Never place your hands or any other part of your body or clothing inside the feeding chamber, discharge chute or near any moving part while the engine is running. • Keep all guards and deflectors in place and in good working condition to assure continued safe operation. • Always stand clear of the discharge area when operating this machine. • Keep your face and body back from the feed opening to avoid accidental bounce back of any material. • Do not over-r...
Otros modelos de este manual:Jardín de las trituradoras - 243-650B000 (1.48 mb)
Jardín de las trituradoras - 243-651B000 (1.48 mb)
Jardín de las trituradoras - 243-648B000 (1.48 mb)