Votos - 3, Puntuación media: 4 ( )

Fabricar: Blodgett Tamaño del archivo: 900.05 kb Nombre del archivo: 944925EN.pdf Idioma del manual:

To switch ON/OFF light in oven cavity, hold button more than 3 seconds TEMPERATURE To check temperature inside the oven cavity. To check the Core Temperature Sensor temperature, when is connected (if applicable). Use only when the oven function is set. Heat-up / Residual heat indicator If you activate an oven function, the bars in the display come on one by one. The bars show that the oven temperature increases or decrease. 12 12 Clock functions CLOCK FUNCTIONS SYMBOL FUNCTION DESCRIPTION MINUTE MINDER Use to set a countdown time. This function has no effect on the operation of the oven. TIME OF DAY To set, change or control the time of day. Refer to 'Setting the time of day'. DURATION Use only when the oven function is set to set how long the oven operates. END Use only when the oven function is set to set when the oven stops. You can use Duration and End at the same time (Time delay), if the appliance is to be activate and deactivate automatically later. Press again and again to switch between the clock functions. To confirm settings of the clock functions use firmation. Setting the DURATION or END or wait 5 seconds for an automatic con 1. Press or 2. Press 3. Press 4. Press 5. Press again and again until the display shows flashes in the display. or to set minutes. to confirm. or to set the necessary hour. to confirm. or . A sound operates after the time ends for 2 minutes. or symbol and time setting flash in the display. The oven stops. 6. Press any button or open the oven door to stop the sound. If you press button during setting hours for DURATION , the appliance goes to setting of the END function. Setting the MINUTE MINDER Use to set a countdown (maximum 23 h 59 min). This function has no effect on the operation of the oven. You can set the MINUTE MINDER at any time, also if the appliance is off. 1. Press . and "00" flash in the display. 2. Press or to set the MINUTE MINDER. At first the time is calculated in minutes and seconds. When the time you set is longer than 60 minutes, the symbol comes on the display. The appliance now calculates the time in hours and minutes. 3. The MINUTE MINDER starts automatically after five seconds. Using the accessories 13 After 90% of the set time, an acoustic signal sounds. Press a button to stop the signal. 4. When the set time ends, an acoustic signal sounds for two minutes. "00:00" and flash in the display. Press a button to stop the signal. If you set the MINUTE MINDER when the DURATION or END function operates, the symbol comes on in the display. Count Up Timer Use the Count Up Timer to monitor how long the oven operates. It is on immediately when the oven starts to heat. Reset the Count Up Timer: press and hold and then the timer start to count up again. You can not use Count Up Timer when Duration or End is set. USING THE ACCESSORIES WARNING! Refer to "Safety information" chapter. Installing the Oven Accessories The deep pan and the wire shelf have side edges. These edges and the shape of the guide-bars causes the anti-tilt safety for the oven accessories. 14 14 Additional functions Installing the wire shelf and the deep pan together Put the wire shelf on the deep pan. Push the deep pan between the guide-bars of one of the oven levels. ADDITIONAL FUNCTIONS Child Lock The Child Lock prevents an accidental operation of the appliance. Activating and deactivating the Child Lock function: 1. Do not set an oven function. 2. Press and hold and at the same time for 2 seconds. 3. An acoustic signal sounds. SAFE comes on/goes out in the display (when you activate or deactivate the Child Lock). If the oven has Pyro Cleaning function, the door is locked. SAFE comes on in the display when you turn a knob or press a button. Control Lock Applicable to models with Pyro Cleaning function. The Control Lock prevents an accidental change of the oven function. You can activate the Control Lock function only when the appliance operates. Activating and deactivating the Control Lock function: 1. Activate the appliance. 2. Activate an oven function or setting. 3. Press and hold and at the same time for 2 seconds. 4. An acoustic signal sounds. Loc comes on/goes out in the display (when you activate or deactivate the Control Lock). If the oven has Pyro Cleaning function, the door is locked. You can deactivate the appliance when the Control lock is on. When you deactivate the appliance, the control lock deactivates. Loc comes on in the display when you turn a knob or press a button. Helpful hints and tips 15 Residual heat indicator Display shows the residual heat indicator after end of every cooking sessions when the temperature inside oven cavity is more then 40°C. Use Temperature knob to show the oven temperature on the display. Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool. If you deactivate the appliance, the cooling fan can continue to operate until the appliance cools down. Automatic switch-off For safety...

Descargar ahora

Introduzca dos números de la imagen: