Votos - , Puntuación media:
(
)
)
Fabricar: Philips
Tamaño del archivo: 707.8 kb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
English
2 Clean the top of the appliance first, using the brush - Do not throw away the appliance with the normal
supplied (Fig. 9).
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
important
3 Press the release button (1) and remove the
this, you help to preserve the environment (Fig. 19).
Read this user manual carefully before you use the
shaving unit (2) (Fig. 10).
Guarantee & service
appliance and save it for future reference.
4 Clean the inside of the shaving unit and the hair
-
Keep the appliance dry (Fig. 1).
chamber with the brush (Fig. 11).
If you need information or if you have a problem, please
-
This appliance is not intended for use by persons
visit the Philips website at www.philips.com or contact
(including children) with reduced physical, sensory
5 Put the shaving unit back onto the shaver.
the Philips Customer Care Centre in your country
or mental capabilities, or lack of experience and
Every two months: shaving heads
(you find its phone number in the worldwide guarantee
knowledge, unless they have been given supervision
leaflet). If there is no Customer Care Centre in your
or instruction concerning use of the appliance by a
1 Switch off the shaver.
country, go to your local Philips dealer or contact the
person responsible for their safety.
Service Department of Philips Domestic Appliances and
-
Children should be supervised to ensure that they
2 Press the release button (1) and remove the
Personal Care BV.
do not play with the appliance.
shaving unit (2) (Fig. 10).
The shaving heads (cutters and guards) are not covered
-
Use and store the appliance at a temperature
3 Remove the retaining frame by pushing the sides
by the terms of the international guarantee because they
between 5°C and 35°C.
of the central spring towards each other (1) and
are subject to wear.
Troubleshooting
Electromagnetic fields (EMF)
lifting the retaining frame out of the shaving unit
This Philips appliance complies with all standards
(2) (Fig. 12).
1 Reduced shaving performance
regarding electromagnetic fields (EMF). If handled
4 Slide the shaving heads out of the retaining frame
, Cause 1: the shaving heads are dirty.The shaver
properly and according to the instructions in this user
and clean them one by one (Fig. 13).
has not been cleaned well enough or has not been
manual, the appliance is safe to use based on scientific
cleaned for a long time.
evidence available today.
Do not mix up the cutters and the guards.
-
Clean the shaver thoroughly before you continue
shaving. See chapter ‘Cleaning and maintenance’.
Inserting batteries
This is essential since each cutter has been ground with
, Cause 2: long hairs are obstructing the shaving
The appliance runs on two R6 AA 1.5-volt batteries.
its corresponding guard for optimal performance. If you
heads
Preferably use Philips alkaline batteries.
accidentally mix the sets up, it could take several weeks
before optimal shaving performance is restored.
-
Clean the cutters and guards with the brush supplied.
Make sure that your hands are dry when inserting the
See chapter ‘Cleaning and maintenance’, section
batteries.
5 Clean the cutter with the short-bristled side of the
‘Every two months: shaving heads’.
brush (Fig. 14).
, Cause 3: the shaving heads are damaged or worn.
1 Remove the lid of the battery compartment (Fig. 2)
Brush carefully in the direction of the arrow.
-
Replace the shaving heads. See chapter ‘Replacement’.
2 Place two batteries in the battery
6 Brush the guard (Fig. 15).
2 The shaver does not work when the on/off slide is
compartment (Fig. 3).
pushed upwards.
Make sure the + and - indications on the batteries match
7 Slide the shaving heads back into the retaining
, Cause: the batteries are empty
the indications in the battery compartment.
frame and put the retaining frame back into the
-
Replace the batteries. See chapter ‘Inserting batteries’.
The shaver does not work if the batteries have been
shaving unit (Fig. 16).
placed incorrectly.
8 Put the shaving unit back onto the shaver.
3 Put the lid of the battery compartment back onto
, For extra thorough cleaning, clean the shaving
the appliance. First insert the top part of the lid
heads by putting them in a degreasing liquid (e.g.
(1) and then press the bottom part down until you
alcohol) every six months. To remove the shaving
hear a click (2) (Fig. 4).
heads, follow steps 1 to 4 described above. After
, To avoid damage due to battery leakage:
cleaning, lubricate the central point on the inside
-
do not expose the appliance to temperatures higher
of the guards with a drop of sewing machine oil to
prevent wear of the shaving heads (Fig. 17).
than 35 cC;
storage
-
remove the batteries if the appliance is not going to
be used for a month or more;
, Put the protection cap on the shaver to prevent
-
do not leave empty batteries in the appliance.
damage (Fig. 7).
Replacement
Cordless shaving time
Replace the shaving heads every two years for optimal
Two new batteries offer a cordless shaving time of 60
shaving results.
minutes.
Replace damaged or worn shaving heads with HQ4 Ç
Using the appliance
Philips shaving heads only.
Shaving
1 Switch off the shaver.
1 Switch on the shaver by pressing the switch lock
2 Press the release button (1) and remove the
and pushing the on/off slide upwards (Fig. 5).
shaving unit (2) (Fig. 10).
The switch lock prevents accidental switching on of the
appliance.
3 Remove the retaining frame by pushing the sides
of the central spring towards each other (1) and
2 Move the shaving heads quickly over your
lifting the retaining frame out of the shaving unit
skin, making both straight and circular
(2) (Fig. 12).
movements (Fig. 6).
Shaving on a dry face gives the best results.
4 Slide the shaving heads out of the retaining
Your skin may need 2 or 3 weeks to get accustomed to
frame (Fig. 13).
the Philips shaving system.
5 Slide new shaving heads into the retaining
3 Switch off the shaver by pushing the on/off slide
frame (Fig. 16).
downwards.
6 Put the retaining frame back into the shaving
4 Put the protection cap on the shaver every time
unit (Fig. 18).
you have used it, to prevent damage (Fig. 7).
7 Put the shaving unit back onto the shaver.
Cleaning and maintenance
Accessories
Regular cleaning guarantees better shaving performance.
The following accessories are available:
, For easy and optimal cleaning, the Philips
Action Clean (shaving head cleaner, type
-
HQ4 Ç Philips shaving heads.
HQ100) is available. Ask your Philips dealer for
-
HQ100 Philips Shaving Head Cleaner (not available
information (Fig. 8).
in China).
-
HQ101 Philips Shaving Head Cleaning fluid (not
Note: The Philips Action Clean may not be available in all
available in China).
countries. Contact the Customer Care Centre in your country -
HQ110 Philips Shaving Head Cleaning Spray (not
about the availability of this accessory.
available in China).
You can also clean the shaver in the following way:
Environment
Every week: shaving unit and hair chamber
-
Batteries contain substances that may pollute the
environment. Remove the batteries when they are
1 Switch off the shaver.
empty or when you discard the appliance. Do not
throw away the batteries with the normal household
waste, but hand them in at an official collection point.
4222.002.4423.6
2/5
...