Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Thermo Products Tamaño del archivo: 1.02 mb Nombre del archivo: Idioma del manual:

SAFETY INFORMATION 1 II. GENERAL INSTRUCTIONS 5 III. FURNACE OPERATION 10 A. WARNINGS BEFORE OPERATING 10 B. OPERATING INSTRUCTIONS 10 C. SHUTDOWN PROCEDURE 11 IV. HOMEOWNER/USER MAINTENANCE INSTRUCTIONS 11 (ROUTINE MAINTENANCE) A. ANNUAL INSPECTION 11 B. FILTER MAINTENANCE PROCEDURE 12 C. VISUAL INSPECTION PROCEDURE 14 All installations and services must be performed by qualified service personnel. I. SAFETY INFORMATION This and the following page contain reproductions of the various warning and instruction labels placed on the Thermo Pride Condensing Gas Furnaces. Please read and comply with the contents of these labels. 1 All installations and services must be performed by qualified service personnel. This and the previous page contain reproductions of the various warning and instruction labels placed on the Thermo Pride Two Stage Condensing Gas Furnaces. Please read and comply with the contents of these labels. 2 All installations and services must be performed by qualified service personnel. 3 All installations and services must be performed by qualified service personnel. 4 This page contains various warnings and cautions found throughout this manual. Please read and comply with the statements below. : IF YOU DO NOT FOLLOW THE SAFETY PRECAUTIONS BELOW AND IN THIS MANUAL, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR LOSS OF LIFE. : Property damage, personal injury, or loss of life could result from repair or service of this furnace by anyone other than a qualified heating contractor. Only the routine maintenance described in this manual may be performed by the user. : To avoid injury from moving parts, shut off the power to the furnace before removing blower compartment door. : Keep furnace free and clear of combustible materials, gasoline, and other flammable liquids and vapors. : Do not use this furnace if any part has been under water. Immediately call a qualified heating contractor to inspect the furnace and to replace any part of the control system and any gas control which has been under water. : If you suspect there is a problem with the furnace, its venting system or any other related problem, immediately contact a qualified service agency. : In the event your furnace fails to operate, do not attempt to put the furnace into operation. Contact a qualified heating contractor to service the furnace. : A fire or explosion may result causing property damage, personal injury or loss of life if you do not follow these instructions exactly. : Homeowners attempting maintenance other than that covered as homeowner/user maintenance may cause conditions which could result in personal injury or property damage. : Shut off the power to the furnace before removing blower compartment door to avoid injury from moving parts. : This furnace is not to be used for temporary heating of buildings or structures under construction. : Call a qualified heating contractor to report suspected deficiencies (Do not attempt to make re...

Descargar ahora

Introduzca dos números de la imagen: