Votos - , Puntuación media: ( )

Manual de usuario Well Traveled Living, modelo FireSense 60763

Fabricar: Well Traveled Living
Tamaño del archivo: 4.65 mb
Nombre del archivo: b9d6ae12-1376-4438-a1fb-be26ada57aff.pdf

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

CONSUMER: Please retain this manual for future reference. Manufacturer: Changzhou Wellife Furnace Co., Ltd. Tools and parts needed for assembly /î\ DANGER CARBON MONOXIDE HAZARD This appliance can produce carbon monoxide which has no odor. 'O' Using it in an enclosed space can kill you. Never use this appliance in an enclosed space such as a camper, tent, car or home. WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment. WARNING : For Outdoor Use Only LPG Cylinders to be used must be constructed and marked in accordance with US DOT specifications. Storage of the heater indoors is permissible only if the gas cylinder is turned off and removed. NOTE: Use only 201b LP-Gas tank with size of 18.1 in / 46cm(Height)*12.5in / 32cm (Width). Do not use if the environment temperature is below 40 degrees F /4.4 degrees C. Tools needed: •Open end wrench 10 & 13mm (included) NOT included: •Adjustable opening wrench 8" long • Slip joint 9" long • Philips screwdriver w/ medium blade •Spray bottle of soapy solution for leak testing -2- PRECAUTIONS NOTE: PLEASE READ THE FOLLOWING SAFETY RULES WARNING: This heater must only be used outdoors. Using this product in an enclosed area may cause injury, death or property damage. Only use in a well-ventilated space. Do not use in a building, garage, or any other enclosed area. Read the instructions before use. This heater must be installed in accordance with local codes or, in the absences of local codes, with the National Fuel Code, ANSI Z223.1. If applicable, the heater, when installed, must be electrically grounded in accordance with local codes or, In the absence of local codes, with The National Electrical Code, ANSI/NFPA70. Do not use the heater in an explosive atmosphere. Keep the heater away from areas where gasoline or other flammable liquids or vapors are stored. Prior to use, check for damaged parts such as hoses, regulators, pilot or burner. Turn off and disconnect LPG cylinder before moving the heater. Do not attempt to alter this heater in any manner. EXAMPLE: Using the heater without the top canopy reflector or radiant screen. Do not shorten the burner post assembly. Do not use this heater in basements or below ground level. It must always be placed on a solid and level surface. Always ensure there is ample fresh air ventilation. For outdoor use ONLY. Never replace or substitute the regulator with any regulator other than the factory suggested replacement. Do not clean the heater with cleaners that are combustible or corrosive. Do not paint radiant screen ,control panel or top canopy reflector. All leak tests should be done with a soapy solution. NEVER USE AN OPEN FLAME TO CHECK FOR LEAKS. The LP gas cylinder should be turned off when the heater is not in use. At least once a year, the unit should be inspected for the presence of spiders, spider webs or other insects. -3- PRECAUTIONS CHECK THE HEATER IMMEDIATELY IF ANY OF THE FOLLOWING EXIST: 1. The smell of gas in conjunction with extreme yellow colored tips of the burner flames. 2. The heater does not reach temperature. 3. The burner makes a popping noise during use (a slight popping noise is normal when the burner is extinguished after using). Children and adults should be aware of the hazards of high surface temperature, and should stay away to avoid burns or clothing ignition. Young children should be carefully supervised when they are in the area of the heater. Clothing or other flammable material should not be hung from the heater, or placed on or near the heater. Any guard or other protective device removed for servicing the heater must be replaced prior to operating the heater. Installation and repair should be done by a qualified service person. The heater should be inspected before use and cleaning mav be reguired at least once a year, or as necessary. It is imperative that the control compartment, burner and circulating passageways of the heater are kept clean. Keep the heater area clear of combustible materials such as gasoline and other flammable vapors and liquids. Do not obstruct the flow of combustion and ventilation air. Keep the ventilation opening of the LPG cylinder enclosure free and clear of debris. Storage of a heater indoors is permissible only if the LPG cylinder is turned off, disconnected and removed from the heater. Cylinders must be stored outdoors in a well-ventilated area out of the reach of children. Disconnected cylinders must have threaded valve plugs tightly installed, and must not be stored in a building, garage or any other enclosed area. -4- ASSEMBLY 1. 3 pcs castle nuts 2. Reflector 3. 6 pcs 8mm washers for pins support 4. 3 pcs 90mm (L) pins for reflector support 5. Head assembly 6. 4 pcs M6xl0mm bolts 7. 2 pcs Post assembly 8. Tank...