High heat setting Set switches 1 and 2 to ON. All three elements will glow and, when the temperature selected on the electronic control dial 3 is reached, two of the elements will automatically turn off, switching back on if the temperature falls. The fire can be returned to low heat setting by pressing switch 2 to OFF. See also ‘Electronic economiser temperature control ’ below. Electronic economiser temperature control This sensitive output control 3 will switch the radiant heater elements ON

Turning the knob clockwise increases the amount of heat stored. The setting should be adjusted from MIN to MAX to suit seasonal requirements. 2. NEON INDICATOR & 3. FAN SWITCH To obtain heat from the Electricaire Unit press the fan switch to the ON position. The fan indicator light will now glow red. If the fan is controlled by a room thermostat it will switch off automatically when the room temperature reaches the required level. The fan should be switched off before retiring at night. This fun

NOTE ALSO THE INFORMATION GIVEN ON THE HEATER • WARNING - THE SURFACES ON THIS HEATER CAN BE HOT. • This heater meets BS 3456 safety requirements. However, any heater type becomes hot in normal operation. Care must be taken to ensure that prolonged skin contact with the heater does not occur. WHERE YOUNG CHILDREN, INFIRM PERSONS, OR THE AGED ARE LIKELY TO BE LEFT UNSUPERVISED IN THE VICINITY OF THE HEATER WE RECOMMEND THAT A GUARD IS FITTED. Contact your installer or the manufacturer for further

User Note: These instructions give important advice on how to get the best out of your new heater. Please read them carefully and keep them in a safe place for future reference. After Sales Service: Your product is guaranteed for one year from the date of purchase. We undertake to repair or exchange this product free of charge within this period providing the product has been installed and operated in accordance with the manufacturers instructions. Should you require after sales service, please

• This heater meets BS 3456 safety requirements. However, any heater type becomes hot in normal operation. Care must be taken to ensure that prolonged skin contact with the heater does not occur. WHERE YOUNG CHILDREN, INFIRM PERSONS, OR THE AGED ARE LIKELY TO BE LEFT UNSUPERVISED IN THE VICINITY OF THE HEATER WE RECOMMEND THAT A GUARD IS FITTED. Contact your installer or the manufacturer for further advice. • THIS APPLIANCE IS EXTREMELY HEAVY. THE FLOOR MUST BE CHECKED TO ENSURE THAT IT IS CAPAB

In addition ensure the input is set at MAX. MAINTENANCE MAINTENANCE ROOM ENVIRONMENTAL CONTROLS The installation may be fitted with several additional environmental controls. A room thermostat may be fitted in the room. This thermostat controls the operation of the heater fan. Adjust the setting until a comfortable environment is achieved. Note however the higher the thermostat setting the higher the running costs. Where duct work is installed individual rooms will be fitted with supply air regi

WARNING – DO NOT USE THIS HEATER IN THE IMMEDIATE SURROUNDINGS OF A BATH, A SHOWER OR A SWIMMING POOL. WARNING – THIS HEATER MUST NOT BE LOCATED IMMEDIATELY BELOW A FIXED SOCKET OUTLET. FOLLOW these instructions carefully. NEVER cover or obstruct in any way the heat outlet slots at the top of the heater. THE HEATER CARRIES A WARNING ‘DO NOT COVER’ TO ALERT THE USER TO THE RISK OF FIRE THAT EXISTS IF THE HEATER IS ACCIDENTALLY COVERED. WARNING – THE SAFETY GUARD ON THIS APPLIANCE CONFORMS TO THE

250mm min. 75mm min. A B C75mm min. THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE IMPORTANT SAFETY INFORMATION WARNING - THE SURFACE OF THIS RADIATOR CAN BE HOT. The surface temperatures of this radiator are within the requirements of EN60-335 the European Standard covering the safety requirements of electric heating appliances, and momentary contact with any part of the radiator should not cause injury. However, in order to be effective, radiators of any type do

Low High Flashing Bar Normal Set the Comfort at the mid point (5 bar) by pressing the + or -buttons to change the number of illuminated bars. Low High Normal If the morning room temperature is not at the desired level, then adjust the Background heat level by pressing and holding down the + button on the temperature control display until 10 red lights are illuminated, continue to hold the +button for a further 7 seconds and a single red light will flash. Use the + button to increase room tempera

Before switching on, please read the safety warnings and operating instructions. In the event of replacing the fuse in the plug supplied, a 13 amp fuse approved by ASTA to BS1362 must be used. Operation The unique flame effect may be enjoyed whether or not the heating elements are in operation. Controls The heater controls are located behind the flap on the front of the heater. (see Fig 1). Three switches provide a choice of heat settings. A switch is in the ON position when the side with the ma