Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
To turn off WAAS alarm: 1. Press MENU|MENU|v to GPS SETUP|ENT|v to SHOW WAAS ALARM. 2. Press ENT to turn it on (check) or turn it off (uncheck). After the option is set, press EXIT|EXIT to return to the page display. 3. To turn the alarm on again, repeat Steps 1 and 2. Software Version Information From time to time, Eagle updates the operating system software in some of its products. These software upgrades usually are offered to customers as free downloads from our web site, The upgrades make the unit perform better or introduce new features and functions. Use the software information command to see what software version is running in your unit. Main Menu with Software Information selected (left). The Software Information screen (right). Press MENU|MENU|v to SYSTEM SETUP|ENT|v to SOFTWARE INFORMATION| ENT. To return to the main page display, press EXIT repeatedly. 155 Sounds highlighted on main menu (left). Sounds menu (right). Sounds Menu To adjust Sounds and Alarm Styles: Press MENU|MENU|v to SOUNDS|ENT. To set Key Press Sounds: Press ENT to turn them on (check) or turn them off (uncheck). To set Alarm Sounds: Press v to ALARM SOUNDS. With the option highlighted, press ENT to turn them on (check) or turn them off (uncheck). To set Volume: Press v to VOLUME. Use <> to adjust the volume. To set Alarm Style: Press v to ALARM STYLE|ENT. Press ^v to change the style and press ENT. After the option is set, press EXIT|EXIT to return to the main page display. Track Smoothing This is a factory setting on the GPS Setup menu that should always be on. When stopped or traveling at slow speeds, like walking or trolling, Track Smoothing prevents trails from wandering. It benefits the steering arrow, compass rose and map in track-up mode in the same manner. 156 Track Smoothing option, turned on. Trail Options There are several options you can use with trails. Some affect all trails, others can be applied to a particular trail. You can change the way trails are updated, display or hide trails, create a new trail, delete a trail, etc. Main Menu (left). Trails Menu (center). Trail Options (right). General Trail Options To access the Trails Menu press MENU|MENU|v to MY TRAILS|ENT. Delete All Trails From the Trails Menu, press > to DELETE ALL|ENT|< to YES|ENT. Update Trail Option This menu lets you change the way the trail updates occur. From the Trails Menu, press > to TRAIL OPTIONS|ENT. With UPDATE ACTIVE TRAIL highlighted, press ENT to turn it on (check) or turn it off (uncheck). 157 WARNING: If you uncheck the Update Trail option, automatic trail creation and recording will be turned off. You must turn it on to record trails. The default setting is on. Update Trail Criteria The options are automatic, time or distance. When it is in the default mode, the unit does not update the plot trail while you are traveling in a straight line. Once you deviate from a straight line, the unit drops a plot point onto the trail. This conserves plot trail points. If a plot trail uses all the available points allotted to it, the beginning points are taken away and placed at the end of the trail. From the Trails Menu, press > to OPTIONS|ENT. Select one of the three Update Criteria options — Auto, Time or Distance — and press ENT. Trail Update Rate A trail updated by time has a range of 1 to 9999 seconds. The default is 3 seconds. The range for updating a trail by distance is 0.01 mile/nm/km to 9.99 mile/nm/km. The default is 0.10 mi. When time or distance are chosen as the update criteria for a trail, a dialog box will appear, allowing you to input the desired update rate or distance. Select the dialog box and press ENT. Use ^v to change the first character, then press > to the next character and repeat until the entry is correct. Press EXIT to return to the Trail Options Menu. Update Rate setting (left) and Update Distance setting (right). 158 Trail Name highlighted (left). Edit Trail menu (center). Trails menu with New Trail highlighted (right). Specific Trail Options Delete Trail From the Trails Menu, press v to trail name|ENT. The Edit Trail menu appears. Press > to DELETE TRAIL|ENT|< to YES|ENT. New Trail To manually start a new trail, in the Trails Menu, highlight NEW TRAIL is highlighted and press ENT. Trail Visibility and Other Trail Options The name, maximum number of points in the trail, activity and visibility are all changed on the Edit Trail menu screen. The Active setting determines whether the unit is recording new points for a trail. Related trail functions are discussed in further detail under the Trails topic in Sec. 7, Advanced GPS Operations. Transparency set to 0 percent (left), 50 percent (center) and 100 percent (right). Transparency Use the transparency menu to adjust the transparency of menu windows. A high transparency setting allows you to continue monitoring 159 the screen's display while working with a menu. A low transparency usually will make menu text easier to read, at the cost of watchi...
Otros modelos de este manual:Sounders - FishElite 640c (6.24 mb)