Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Do not allow the milk to boil. Steaming the milk • Remove the froth enhancer from the steam tube and follow the above instructions for frothing milk. Use this method when less froth is required, for example, to heat the milk for flat white coffee. • Turn the Espresso/Steam Selector Control to the ‘STANDBY’ position to stop the steaming function before removing the carafe. • Add the frothed or steamed milk to each cup of freshly brewed espresso coffee and spoon on the frothed milk where required. • Switch the power off at the power outlet, unplug the power cord, remove all steam pressure and allow the appliance to cool. 7 • Do not remove the Espresso water tank cap or the Espresso filter holder until the steam pressure in the appliance has been released. TO AVOID SPLATTERING OF HOT MILK, DO NOT LIFT THE STEAMING NOZZLE ABOVE THE SURFACE OF THE MILK WHILE FROTHING OR STEAMING. ENSURE THE ESPRESSO/STEAM SELECTOR CONTROL IS IN THE ‘STANDBY’ POSITION BEFORE REMOVING THE CARAFE. 3) HOW TO MAKE DRIP FILTER COFFEE Filling the Drip Filter water tank • Lift the Drip Filter lid and remove the water tank by pulling it upwards using the black handle provided. Fill the Drip Filter water tank with cold water and replace it firmly into position. Alternatively, the Drip Filter water tank can remain in position and be filled with cold water using a jug.The number of cups is shown on the water level indicator. Do not exceed the maximum fill level. • Insert plug into a 230/240V power outlet and then switch on at the outlet. • Ensure the Drip Filter holder is firmly positioned into place by aligning the grooves in the Drip filter holder with the indented grooves in the machine. Ensure the permanent mesh filter basket is correctly positioned into the Drip filter holder. • Spoon ground coffee into the permanent mesh filter basket.Allow approximately 1 heaped teaspoon of ground coffee for each cup of brewed coffee. • Move the Black Bar Drip Filter Mechanism into position at a 45 degree angle over the Drip filter holder. The Drip Filter Lid will not close if the Black Bar Drip Filter Mechanism is not placed into the correct position for brewing. Close the Drip Filter lid. •Position the empty large carafe, with the lid on, onto the hot plate. 8 Caution: To avoid the Drip filter basket overflowing, the large carafe must fit securely into the coffee maker hot plate, with the lid on at all times. If not properly positioned on the hot plate, hot water or hot coffee may overflow. • Select ‘AROMA BREW’ if you would like a stronger coffee.The coffee will take longer to drip through to ensure that the maximum flavour is extracted. We recommend to use this function for 1-3 cups. • Select ‘EXPRESS BREW’ for faster results.We recommend to use this function when making 4-10 cups. • Press the Filtered Coffee button to start the Drip Filter function of the coffee maker. The light will illuminate and the coffee will start to drip through. Caution: Do not open the Drip Filter water tank lid during the brewing cycle as hot steam could cause injury. If water/coffee is not dripping from the coffee maker, immediately press the Filtered Coffee button to ‘STANDBY’, switch off at the power outlet, unplug and wait 10 minutes before opening the Drip Filter water tank lid and checking the filter basket. NOTE! Permanent Mesh Filter Basket This filter basket is provided to ensure optimal flavour extraction from the finely ground coffee into the brewed coffee. The filter basket should be washed in warm, soapy water after each use, then rinsed and dried thoroughly. Replace back into the Drip filter holder. Disposable paper coffee filters are not necessary and should not be used with or without the Permanent Mesh Filter Basket • The Non-drip valve feature allows the brewing cycle to be interrupted before the carafe has finished filling. While the Non-drip feature is a convenient way to pour a cup of coffee mid-cycle, we recommend you wait until the completion of the brew cycle, as the strength and flavour of the coffee poured mid-cycle will vary from the finished brew. Caution: While this temporarily stops the coffee from dripping into the carafe, it does not stop the brewing cycle. After pouring a cup of coffee, the carafe should immediately be returned to the hotplate for completion of the brewing cycle and to prevent the filter basket from over flowing. • When the brewing process ends and the water tank level indicator is on empty, there will still be hot liquid in the Drip filter basket.Wait a few minutes for the rest of the liquid to drip through into the carafe. • After the coffee grounds have cooled, open the water tank lid and carefully remove the permanent mesh filter basket by grasping the handle, and lifting straight up from the Drip filter basket holder. 9 Caution:The Cafe 3 in 1 coffee maker becomes very hot during the Drip filter brewing cycle. Please handle with extreme care. • The hot plate will keep the Drip Filter coffee in the large carafe hot ...
Otros modelos de este manual:Cafeteras - Caf 3 in 1 Coffee Maker KDC120 (149.88 kb)
Cafeteras - Caf 3 in 1 Coffee Maker KDC120 (149.88 kb)