Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
All rights reserved. All trade names are registered trademarks of respective manufacturers listed. RK2000ek Product Inventory RK2001ek Product Inventory Vertical Upright Channel 84”(2134mm) (2) Vertical Upright Channel 48” (1220mm) (2) Base Angle (2) Base Angle (2) Top Angle (2) Top Angle (2) 1/2” (13mm) - 13 x 1 Hex Bolt (12) 1/2” (13mm) - 13 x 1 Hex Bolt (12) 1/2” (13mm) Lock Washer (12) 1/2” (13mm) Lock Washer (12) 12-24 x 1/2” (13mm) lg. Screws (50) 12-24 x 1/2” (13mm) lg. Screws (50) Tools Required 3/4”(20mm) Socket or Wrench Level or Carpenter Square RK2000ek and RK2001ek INSTRUCTIONS Instructions 1. Install top angles to vertical upright channels. a. Lay vertical upright channels on edge so tapped holes face you and the floor. Be sure open sides of upright channels face each other. b. Align holes in top angle with corresponding holes in vertical uprights. Formed leg of top angle should be facing toward you. c. Install hex head bolts and lock washers. Finger tighten only. d. Turn vertical upright over (rotate 180 degrees) and repeat steps (a) through (c). Finger tighten only. Top Angle Hex Bolt and Lock Washer RK5000ek RK2001ek Instructions P35727ec EN DE FR Belkin Tech Support Europe: 00 800 223 55 460 For other languages: Belkin Ltd. Express Business Park Shipton Way, Rushden NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax Belkin GmbH Hanebergstrasse 2 80637 Munich, Germany +49 (0) 89 143405 0 +49 (0) 89 143405 100 fax Belkin SAS 130 rue de Silly 92100 Boulogne Billancourt, France +33 (0) 1 41 03 14 40 +33 (0) 1 41 31 01 72 fax © 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Instructions (cont’d.) 2. Install base angles to vertical upright channels. a. Leaving vertical upright channels on edge, align holes in base with corresponding holes in each upright channel. Long leg of base should be facing you. b. Install 4 hex head bolts and lock washers. Finger tighten only. c. Turn vertical upright assembly over (rotate 180 degrees) and repeat steps (a) and (b). Finger tighten only. 3. Final tightening. a. Stand rack upright. b. Square unit using a level or carpenter square. c. Tighten all bolts using socket or wrench. 4. Secure rack to floor. All racks should be bolted to the floor, or to an equally stabilizing and secure surface, after desired location is determined. 5. Equipment installation. Your rack is now ready for installation of equipment and panels. Base Angle Belkin Ltd. Express Business Park Shipton Way, Rushden NN10 6GL, Royaume-Uni +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 Fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, Pays-Bas +31 (0) 20 654 7300 +31 (0) 20 654 7349 Fax Belkin GmbH Hanebergstrasse 2 80637 Munich, Allemagne +49 (0) 89 143405 0 +49 (0) 89 143405 100 Fax Belkin SAS 1...
Otros modelos de este manual:Accesorios para el ordenador - RK2000ek (620.58 kb)
Accesorios para el ordenador - RK2001ek (620.58 kb)
Accesorios para el ordenador - RK5000ek (620.58 kb)