...... . ... . ... .... ... . .... . .. ... .... .. ..... . ........... ... .... ....... .... 1 Contents Welcome Introduction2 Supplied items3 Module features4 Installation and operation Installation5 Stage A - Configuration switch settings5 LOCAL module switches5 REMOTE module switches6 Stage B - Mounting a module – desk or rack7 Installation Advice7 Stage C - Connections8 Connections at the LOCAL module8 Connections at the REMOTE module11 Operation14 Power and activity indicators14 General use

31 4.4 Mouse mode and mouse switching of channels .................................... 32 4.5 Keyboard hotkey combination ............................................................... 33 4.6 Firmware functions (version query, mouse restore and reset) .............. 34 4.7 Display appearance options .................................................................. 34 4.8 Setting a security password .................................................................. 35 4.9 Cascade query code ...

Once activity is detected then this new port becomes the active port and the other port is disabled. The currently active port is indicated on the front panel. If neither the A or B lights are on then either control port may be used. 3.6 Keyboard hotkey control SmartView can be conveniently controlled by selecting channel, autoscan mode or security locking from the keyboard. All of the hotkey control commands are invoked by holding down the two hotkeys and then pressing a command key. By default

Control can only be regained by typing the correct password on the keyboard. To set the password in configure mode, first type ‘P’ then (enter). The display on SmartView will change to show ‘=‘ and you can then type your password. The password is not case sensitive and can be any combination of key strokes, including the function keys, but excluding the (ctrl), (alt), (shift) and (enter) keys. When you have typed in your password type (enter) to register it in the stored memory. Do not worry if

1 - SmartView SV8PRO Fig. 2 - Remote control pad / display (optional accessory for 4 & 8 port models) SmartView Installation and Use Page 8 Fig. 3 - SmartView SV4PRO SmartView Installation and Use Page 9 Fig. 4 - SmartView SV12PRO SmartView Installation and Use Page 10 Fig. 5 - SmartView SV16PRO 2. Installation 2.1 What you will need Cables to connect the SmartView to each of your PC keyboard, video and mouse ports. Cable specifications are given in appendix A. (You do not need to connect a mous

(b) Increase the separation between the equipment and the receiver. (c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. (d) Consult the supplier or an experienced radio/TV technician for help. Adder Corporation, Adder Asia Pacific 29 Water Street, 6 New Industrial Road, Newburyport, MA 01950, Hoe Huat Industrial Building United States of America #07-01, Singapore 536199 Tel: +1-888-932-3337 Tel: +65 6288 5767 Fax: +1-888-275-1117 Fax: +65 6