The STK501 includes connectors, jumpers, and hardware allowing full support for the new features on ATmega103, ATmega64, and ATmega128. The Zero Insertion Force (ZIF) socket allows easy use of TQFP packages. In addition to providing support for new devices, the STK501 also adds support for peripherals previously not supported by the STK500. An additional RS-232 driver and an XRAM interface are among the new features. Devices with dual UART or XRAM interface can thus take advantage of the new res

Flexible Clocking, Voltage and Reset Supply Voltage 9 – 12V System MICROCONTROLLERSStarter Kit and Development System ©Atmel Corporation, 2002 Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifi

This configuration enables parallel hardware/software testing of the application under development at close to operational speed, with no penalty for hardware modifications. This enables software development to proceed in parallel with hardware development, and significantly reduces the design cycle time, increasing confidence in a right-first-time system solution. The AT91CAP7X-DK development board or “kit” is composed of three associated boards, namely Motherboard, Mezzanine and Memory Extensi

1-2 1.1 C51/C251 Support ....................................................................................1-2 1.2 Demo Board Features...............................................................................1-3 Section 2 Hardware Description ........................................................................... 2-4 2.1 Block Diagram...........................................................................................2-4 2.2 Specifications........................................

They differ oniy in features, pin count and memory size. This enabie AVR to cover the compiete 8- and 16-bit market with one singie, compatibie product famiiy. FEATURES picoPower Technology Reducing power consumption-maintaining performance picoPower — Best MCU power budget Atmel’s picoPower technology reduces power consumption in both sleep and active mode. With picoPower technology the embedded designer can reduce the applications power consumption while maintaining performance. True 1.

The kit allows designers to design, synthesize, simulate and program Atmel’s new FPSLIC product. A comprehensive tutorial takes designers through the complete FPSLIC development process. The starter kit, which runs on PC Windows®-based platforms, includes everything needed to get started with FPSLIC, including all software, tutorials, complete documentation, boards, parts and cables. The kit consists of a starter kit board that includes: AT94K40AL Device AT17LV010 Device AT17 Series ISP Port

8161DS–AVR–10/09 ATmega48PA/88PA/168PA/328P ATmega48PA/88PA/168PA/328P Pin Configurations Figure 1-1. Pinout ATmega48PA/88PA/168PA/328P TQFP Top View PDIP (PCINT2/SS/OC1B) PB2 PC4 (ADC4/SDA/PCINT12) (PCINT1/OC1A) PB1 PC5 (ADC5/SCL/PCINT13) (PCINT0/CLKO/ICP1) PB0 PC6 (RESET/PCINT14) (PCINT3/OC2A/MOSI) PB3 PC3 (ADC3/PCINT11) (PCINT4/MISO) PB4 PC2 (ADC2/PCINT10) (PCINT21/OC0B/T1) PD5 PD2 (INT0/PCINT18) (PCINT23/AIN1) PD7 PD0 (RXD/PCINT16) (PCINT22/OC0A/AIN0) PD6 PD1 (TXD/PCINT17) (PCINT0/CLKO/ICP1)

1149.1 Compliant) Interface – Boundary-scan Capabilities According to the JTAG Standard – Extensive On-chip Debug Support – Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Six PWM Channels – 8-channel, 10-bit ADC Differential mode with selectable g

On delivery the AVR is fleshed with the current firmware and does not need any special programming or settings. Check that jumper J3 on the antenna interface is in the default position en. 2.2Software Installation The ATAK2270 host installation software as well as the related datasheets and documentation are provided by the CD-ROM included in the kit. Furthermore, the up-to-date software and documentation are available via the web. Execute the setup.exe file found on the CD-ROM to launch the ins

Description The ATA5283 is a 125 kHz ultra-low power receiver used for the wake-up function of Tire Pressure Monitoring (TPM) application. The sensitive input stage of the IC amplifies and demodulates the carrier signal from the antenna coil to a digital output signal for a microcontroller. During the standby mode the preamble detection unit monitors the incoming signal and activates the wake-up output and the data output, if the IC receives a proper 125 kHz carrier signal. By combining the IC w