Votos - 1, Puntuación media: 5 ( )

Fabricar: Advantech Tamaño del archivo: 5.24 mb Nombre del archivo: Idioma del manual:

. Introduction . Installation of Ethernet Driver -for Windows 95 -for Windows 98 -for Windows NT . Further Information CHAPTER 4.1 Introduction The IPPC-9120/9150 is equipped with a high performance 32-bit Ethernet chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD standards. It is supported by major network operating systems. It is also both 100Base-T and 10Base-T compatible. The medium type can be configured via the RSET8139.exe program included on the utility disk. The Ethernet port provides a standard RJ-45 jack. The network boot feature can be utilized by incorporating the boot ROM image files for the appropriate network operating system. The boot ROM BIOS files are combined with system BIOS, which can be enabled/disabled in the BIOS setup. 4.2 Installation of Ethernet Driver Before installing the Ethernet driver, note the procedures below. You must know which operating system you are using in your IPPC-9120/ 9150, and then refer to the corresponding installation flow chart. Then just follow the steps described in the flow chart. You will quickly and successfully complete the installation, even if you are not familiar with instructions for Windows. Important: The following windows illustrations are examples only. You must follow the flow chart instructions and pay attention to the instructions which then appear on your screen. Note 1: The CD-ROM drive is designated as "D" throughout this chapter. Note 2: means pressing the "Enter" key on the keyboard. IPPC-9120/9150 Series User's Manual 4.2.1 Installation for Windows 95 1. a. Select "Start," "Settings," "Control Panel," "System" b. Click "Device Manager" and "Other Devices" c. Remove "PCI Ethernet Controller" item 2. a. Select "Start," "Settings," "Control Panel" and "Network" b. Click "Add" Chapter 4 PCI Bus Ethernet Interface 3. Select "Adapter" and then "Add" 4. Press the "Have Disk..." button 5. a. Type path "D:\IPPC9150&9120T\Lan\W95OSR2" b. Click "OK" IPPC-9120/9150 Series User's Manual 6. a. Choose "Realtek RTL8139(A/B/C/8130)PCI Fast Ethernet" b. Press "OK" 7. a. Press "Add..." to select suitable services or protocol b. Press "OK" to finish network configuration 8. Press "Yes" to reboot your system Chapter 4 PCI Bus Ethernet Interface 4.2.2 Installation for Windows 98 1. a. Select "Start," "Settings," "Control Panel," "System" b. Click "Device Manager" and "Other Devices" c. Remove "PCI Ethernet Controller" item 2. a. Select "Start," "Settings," "Control Panel" and "Network" b. Click "Add" IPPC-9120/9150 Series User's Manual 3. Select "Adapter" and then "Add" 4. Press the "Have Disk..." button 5. a. Type path "D:\IPPC950&9120T\LAN\WIN98" b. Click "OK" Chapter 4 PCI Bus Ethernet Interface 6. a. Choose "Realtek RTL8139(A/B/C/8130)PCI Fast Ethernet" b. Press "OK" 7. a. Press "Add..." to select suitable services or protocol b. Press "OK" to finish network configuration 8. Press "Yes" to reboot your system IPPC-9120/9150 Series User's Manual 4.2.3 Installation for Windows NT 1. a. Select "Start," "Settings," "Control Panel" and double click the "Network" icon b. Choose "Adapters" tab c. Click "Add" 2. Press "Have Disk..." Chapter 4 PCI Bus Ethernet Interface 3. a. Enter the path "D:\IPPC9150&9120T\LAN\Winnt4" b. Press "OK" 4. a. Choose "Realtek RTL8139(A/B/C/8130)PCI Fast Ethernet" b. Press "OK" 5. Choose a suitable RTL8139 Duplex mode for your application IPPC-9120/9150 Series User's Manual 6. Finish network configuration and click "OK" Chapter 4 PCI Bus Ethernet Interface 4.3 Further Information Realtek website: Advantech websites: IPPC-9120/9150 Series User's Manual 5 PCI SVGA Setup . Introduction . Installation of SVGA Driver -for Windows 95 -for Windows 98 -for Windows NT . Further Information CHAPTER 5.1 Introduction The IPPC-9120/9150 has an onboard AGP flat panel/VGA interface. The specifications and features are described as follows: 5.1.1 Chipset The IPPC-9120/9150 uses a Lynx3DM chipset from Silicon Motion Inc. for its AGP/SVGA controller. It supports TFT, DSTN flat panel dispays and conventional analog CRT monitors. The SMI 710 VGA BIOS supports monochrome LCD, EL, color TFT and STN LCD flat panel displays. In addition, it also supports interlaced and non- interlaced analog monitors (color and monochrome VGA) in high- resolution modes while maintaining complete IBM VGA compatibility. Digital monitors (i.e. MDA, CGA, and EGA) are NOT supported. Multiple frequency (multisync) monitors are handled as if they were analog monitors. 5.1.2 Display memory With onboard 4 MB display memory, the VGA controller can drive CRT displays or color panel displays with resolutions up to 1024 x 768 at 16 M colors. 5.1.3 Display types CRT and panel displays can be used simultaneously. The IPPC-9120/ 9150 can be set in one of three configurations: on a CRT, on a flat panel display, or on both simultaneously. The system is initially set to simultaneous display mode. If you want to...

Descargar ahora

Introduzca dos números de la imagen: