Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
too warm - NO ice forming on Temperature is set too High. Set temperature to a Lower setting. cooling coil behind decorative front. Air directional louvers positioned improperly. Position louvers for better air distribution. Front of unit is blocked by drapes, blinds, furniture, etc. - restricts air distribution. Clear blockage in front of unit. Doors, windows, registers, etc. open - cold air escapes. Close doors, windows, registers, etc. Unit recently turned on in hot room. Allow additional time to remove “stored heat” from walls, ceiling, floor and furniture. Air conditioner turns on and off Dirty air filter - air restricted. Clean air filter. rapidly. Outside temperature extremely hot. Set FAN speed to a faster setting to bring air past cooling coils more frequently. Noise when unit is cooling. Air movement sound. This is normal. If too loud, set to a slower FAN setting. Window vibration - poor installation. Refer to installation instructions or check with installer. Water dripping INSIDE when unit is Improper installation. Tilt air conditioner slightly to the outside to allow water drainage. Refer to installation cooling. instructions - check with installer. Water dripping OUTSIDE when unit Unit removing large quantity of moisture from humid room. This is normal during excessively humid days. is cooling. Room Too Cold. Set temperature too low. Increase set temperature. If These Solutions Fail, Call 1-800-444-4944 For Frigidaire Service. 11 ...
Otros modelos de este manual:Los acondicionadores de aire - 000BTU (1.83 mb)
Los acondicionadores de aire - 100BTU-25 (1.83 mb)