Votos - 2, Puntuación media: 4.5 ( )

Fabricar: LG Tamaño del archivo: 1.69 mb Nombre del archivo: Idioma del manual:

• Use a 15 amp time delay fuse or a circuit breaker. • Do not switch off by unplugging the power plug while it is operating. Press the OFF/ON pad to “OFF” before unplugging. This sign warns of injury or damage to property. OPERATION PRECAUTIONS Time Delay Fuse : 15 Amps Rated Voltage : 115V • Socket Type • Line Cord Plug INSTALLATION BOX CONTENTS Sealer 50 g (1.8 oz) (Putty) Type A screw Window sash sealing ribbon Type C screws Type B screws Left side expandable panel Type A screws Type C screws Top angle Window sash foam seal Right side expandable panel Type A Type B Type C (Qty 6) (Qty 5) (Qty 6) SCREW FURNISHED Wood Machine Tapping Screw Screw Screw SUGGESTED TOOL LIST Medium sized screwdriver (#2 Phillips) Tape Measure Pencil Level Knife or Scissor ACCESSORIES NOTE Check that none of the accessories are missing. (6 pcs) (XTN5D25A) (5 pcs) (CWH4580211) (6 pcs) (XTT4D8C) SELECT THE BEST LOCATION (Single or Double hung window) 19–3/16 inches SIDE VIEW Front grille Window 12 inches More than 4 inches Type A screws Type A screw Top sealing ribbon Side sealing ribbon WINDOW REQUIREMENTS • Hot sun rays hitting the outside surface of the cabinet will create considerable heat load. If the outside of the cabinet is exposed to direct sunlight, consider building an awning to shade the cabinet while providing ample area for the heated air to be exhausted from the condenser (both sides) and the top. This unit is designed for installation in standard double hung windows. NOTE The unit may also be installed “through the wall”. You should, however, observe standard carpentry practices and frame the opening without violating local ordinances. INSTALLATION PROCEDURES HOW TO ASSEMBLE THE EXPANDABLE PANELS Top angle Type B screws Type C screws • Attach the top angle to the cabinet using screw type B (3 pcs). • Insert expandable panels to cabinet sides as shown. • Secure the first fold of expansion panel to cabinet using screw type C (3 each). Expandable panel CHASSIS INSTALLATION INTO THE CABINET 1 Remove the rear cabinet screws and save for later use. 2 Slide the chassis out from the cabinet. CABINET INSTALLATION 1 Cut the “Sealing Ribbon” to the proper length, and attach it along the bottom edge of the bottom window sash. 2 To prevent condensation water from dripping inside, the cabinet should be installed level or very slightly tilted to the outside. 3 Secure the cabinet using screws. • Expand the expandable panel fully into the grooves of the window frame, secure the expandable panel, left, right and top mounting frames to the bottom of the window sash using 6 screws type A and 2 screws type B. • Secure the cabinet using wood screws type A. • Cut the window sash foam seal to the proper size and seal the opening between the top of the inside window sash and the outside window sash. Note : If a gap exists between the unit and window sash, you may use “S...

Descargar ahora

Introduzca dos números de la imagen: