Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
Using the hole in the top and bottom of each Window Kit Frame as a guide, secure Window Kit Frame in window sash and on the window sill. WINDOW SHUTTER WINDOW SASH WINDOW FRAME Screw (Type C) Screw (Type C) INNER WINDOW SILL 7 • Step 6 - Recheck Installation To be sure you have correctly installed your Room Air Conditioner, review the steps and make sure all of the parts are securely fastened in the window as the instructions show. A tight seal is essential. Read through the Use & Care manual to become familiar with the operation of your room air conditioner. • Step 7 - Install Unit and assemble Front Grille 1. Fasten Drain to Base Pan with “Type D” screws. only. Use of any other longer screw may result in the leakage of refrigerant and will cause serious damage to the unit. 2. Push the unit into the installed Chassis. 3. Fasten Base Pan and Chassis with screws to side holes. 4. Assemble Front Grille into Chassis holes. – Snap Front Grille’s hook to each Chassis holes. (Be careful the end of ventilation bar is to be located in the gap of blade.) CONDENSOR PAN BASE .............................................................................................................................................................................. SEAL DRAIN DRAIN Screw (Type D) CAUTION Do not lift window sash without holding the unit. The window sash helps keep the unit in the window. Exercise caution when opening the window. Failure to do so many result in personal injury and/or property damage. CAUTION • When the front grille is reinstalled, the DOOR VENT should be in position first so that it would not be bent by grille. Door Vent 5. Fasten Front Grille with screws. 6. Insert Filter into the Front Grille. 7. Push the Knobs into the control. • Step 8 - Recheck the entire installation WINDOW SEAL A Screw (Type C, 2 pieces) WINDOW KIT 'R & 'L Screw (Type E, 2x4=8 pieces) GUIDE LOWER Screw (Type C, 2x1=2 pieces) Screw (Type C, 3 pieces) SILL SILL BRACKET(2 pieces) Leveling Screw (Type A, 2x1= 2 pieces) Screw (Type B, 2x2=4 pieces) OUTER WINDOW SILL 38mm 15WINDOW SASHTOP GUIDE WINDOW KIT FRAME WINDOW SEAL B WALL 8 5 6 2 3 7 4 8 11 10 9 12 1 6 12 5 2 3 7 4 8 1 NO PART NAME 1 AIR FILTER 2 GRILLE FRONT 3 CABINET 4 BLADE VERTICAL 5 KNOB THERMOSTAT 6 KNOB SELECTOR NO PART NAME 7 BLADE HORIZENTAL 8 AIR VENT 9 FRAME GUIDE TOP 10 FRAME WINDOW KIT 11 SHUTTER WINDOW 12 AUTO LOUVER S/W (DWC-100CS/DWC-121CS/DWA-122CS/DWA-150CS/DWA-151CS) NAMES OF MAJOR COMPONENTS • DWC-100CS / DWC-121CS / DWA-122CS / DWA-150CS / DWA-151CS 5 6 2 3 7 4 8 11 10 9 1 5 6 2 3 7 4 8 1 • DWC-100C / DWC-121C / DWA-122C / DWA-150C / DWA-151C 9 OPERATING INSTRUCTIONS NOTE • FOR MOST ECONOMICAL USE 1. Properly control the room temperature. 2. Avoid the unit being exposed to direct sunlight. Keep direct sunlight from the room. 3. Do not leave doors and windows open. • FAN & COOLING CONTROL The Fan Control Selector Switch has six positions. Choose one of the speed settings by rotating the fan control ...
Otros modelos de este manual:Los acondicionadores de aire - DWA-122CS (260.31 kb)
Los acondicionadores de aire - DWA-122CS (260.31 kb)
Los acondicionadores de aire - DWA-150C (260.31 kb)
Los acondicionadores de aire - DWC-100CS (260.31 kb)