Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
n n I a-u u V Otn • D il PM 1U-J u / I \ AM r ■ n n I o-u u 0e, O Om • 3 I < PM (U ■ J U -X| >5: /1 \ n n uu Point the signal window of the remote controller toward the cooling unit, and press the O (CANCEL) button. The © (RESERVED) sign goes out with a beep and the 0 (TIMER) lamp turns off on the cooling unit. NOTE You can set only one of the OFF-timer, ON-timer and ON/OFF-timer. - 10 - 2 Set the current time with the HOURS and MINUTES buttons. 3 Press the TIME button again. The time indication starts lighting instead of blinking. (7*S • The time indication will disappear automatically in 10 seconds. • To check the current time setting, press the TIME button twice. Example: The current time is 1.30 p.m. The setting of the current time is now complete. dL Set the turn-off time with the HOURS and MINUTES buttons. y ñ y . \ ' / + _ _ i i - n n ~ ^pm I I -IJ U / I ^ Point the signal window of the remote controller toward the cooling unit, and press the I (RESERVE) button. The O (OFF) mark starts lighting instead of blinking and the sign © (RESERVED) lights. A beep occurs and the © (TIMER) lamp lights on the cooling unit. I O o O t I • n n ^ PM I I ■ u u Example: The device will turn off at 11:00p.m. The setting of turn-off time is now complete. Set the turn-on time with the HOURS and MINUTES buttons. V \ 1 / _ a djw —( - H H 1 i - u u / i \ O Point the signal window of the remote controller toward the cooling unit, and press the l (RESERVE) button. The I (ON) mark starts lighting instead of blinking and the © (RESERVED) sign lights. A beep occurs and the © (TIMER) lamp lights on the cooling unit. O o / -u u Example: The device will simply turn on at 7:00 a.m. (Circulating and fan operation) The device will automatlcly turn on and control to the temperature set at 7:00 a.m. (Cooling and dehumidlfying operation) The setting of the turn-on time is now complete. ff Set the turn-on time with the HOURS and MINUTES buttons. V I n- 3 n W PM I lj. J )J _ I é№ / ■ n n 1 Í • u u / I \ ^ Point the signal window of the remote controller toward the cooling unit, and press the I (RESERVE) button. The i (ON) mark starts lighting instead of blinking and the © (RESERVED) sign lights. A beep occurs and the © (TIMER) lamp lights on the cooling unit. Or n- D n PM I U- D U O © A Example: The device will turn off at 10:30 p.m. and then turn on at 7:00 a.m. (Circulating and fan operation) The device will turn off at 10:30 p.m. and then automatlcly turn on and control to the temperature set at 7:00 a.m. (Cooling and dehumldifylng operation) The settings of the turn-on/off times are now complete. • The timer may be used in three ways: off-timer, on-timer, and on/off (off/on)-timer. Set the current time at first because it serves as a reference. • As the time settings are stored in memory in the remote controller, you only have to press the I (RESERVE) button in order to use the same settings next time. • ON-Timer The device will turn on before the preset time. Temperature will be reached at the designated time. Operation starting time varies depending on the conditions such as room temperature, set room temperature, etc. - 11 - ENGLISH HOW TO SET THE SLEEP TIMER Set the current time at first if it is not set before (see the pages for setting the current time). Press the H (SLEEP) button, and the display changes as shown below. o loi E3 o PJl:38 © 0<-> I Hr. Min 0 (A) 3 3 CANCEL SLEEP ( Mode Indication ^ Sleep timer hour-^2 hours—^3 hours -► 7 hours —i I-Sleep timer off -1 J r Sleep Timer: The device will continue working for the designated number of hours and then turn off. Point the signai window of the remote controller toward the cooling unit, and press the SLEEP button. The timer information will be displayed on the remote controller. The TIMER lamp lights with a beep in the cooling unit. When the sleep timer is set, the display indicates the turn-off time. O «* j . j q Example: If you set 3 hours sleep l—I L -JL! time at 11:38 p.m., the turn-off Jh ® time is 2:38 a.m. J The device will be turned off by the sleep timer and turned on by on-timer. 1 Set the ON-timer. Press the EH (SLEEP) button and set the sleep timer. For example: j ; -j j-j In this case, the device will turn [*_| O™ “ ~ 0ff after 2 hours (at 1:38 a.m.) pH O ^ and starts at 6:00 next morning. I AM r * n n Q • U U Point the signal window of the remote controller toward the cooling unit, and press theO (CANCEL) button. The © (RESERVED) sign goes out with a beep and the© (TIMER) lamp turns off on the cooling unit. NOTE If you set the sleep timer after the off-timer or on/off-timer is set, the sleep timer becomes effective instead of the off- or on/off-timer. - 12 - Explanation of the sleep timer The device will control the fan speed and room temperature automatically so as to be quiet and good for people’s health. You can set the sleep timer to t...
Otros modelos de este manual:Los acondicionadores de aire - BCC-12I (766.89 kb)
Los acondicionadores de aire - BCC-12E (766.89 kb)
Los acondicionadores de aire - BCC-9I (766.89 kb)