Votos - 2, Puntuación media: 4.5 ( )

Fabricar: Dimplex Tamaño del archivo: 694.31 kb Nombre del archivo: Idioma del manual:

This appliance should only be connected to the fixed wiring of the premises by means of conduit. This product should be mounted safely to solid wall or ceiling surfaces only. This product must not be subjected to water spray or immersion. Ensure the supply cables are of adequate current carrying capacity and are protected by a suitable fuse. If the appliance is mounted in a toilet or washroom, the appliance should be mounted such that no part of it can be touched by a person using a fixed bath or shower. If the appliance is mounted in a toilet or washroom an isolating switch must be provided outside the washroom adjacent to the entrance door. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety. WARNING: Isolate electrical supply to ALL modular linked units when carrying out maintenance. Models Model Heat output kW Electrical Supply Electrical load (per phase) Weight kg Max Installed height m AMBIENT / COLD STORE CAB10A n/a 220-240V ~1PN 0.3 15.5 3.0 CAB15A n/a 220-240V ~1PN 0.5 21.5 3.0 DAB10A n/a 220-240V ~1PN 1.5 21.5 4.0 DAB15A n/a 220-240V ~1PN 2.3 27.5 4.0 ELECTRICALLY HEATED CAB10E 4.5 / 9.0 380-415V ~3PN 14 20.5 3.0 CAB15E 6.75 / 13.5 380-415V ~3PN 20 29 3.0 DAB10E 6.0 / 12.0 380-415V ~3PN 18 26.5 4.0 DAB15E 9.0 / 18.0 380-415V ~3PN 27 35 4.0 WATER HEATED (at 82/71 °C - LPHW)** CAB10W 9.0 220-240V ~1PN 0.3 17.7 3.0 CAB15W 13.5 220-240V ~1PN 0.5 24.6 3.0 DAB10W 12.0 220-240V ~1PN 1.5 24.7 4.0 DAB15W 18.0 220-240V ~1PN 2.3 31.9 4.0 Electrical The installation of this appliance should be carried out by a competent electrician and be in accordance with the current IEE wiring regulations. Fixing Positions This appliance may be either wall-mounted or fixed to a ceiling see Fig. 3a & 3b for fixing positions and ‘Mounting’ sections below for fixing details. A minimum distance of 100mm is required from the top of the appliance to ceiling - see ‘a’ in Fig. 1. The distance between the bottom of the appliance and the top of a door should be kept to a minimum - see ‘b’ in Fig. 1. This appliance should not be mounted less than 1.8m from the floor. Wall Mounting Using the wall mounting bracket as a guide (see Fig. 2) mark off hole positions on the wall (a minimum height of 2.0 metres is required from the floor level to the bottom of the bracket). Position the bracket such that the air outlet of the installed air curtain will be as close to the top of the doorway as possible but will remain unobstructed when installation is complete. Solid brick or concrete block walls must be drilled and plugged (using a spirit level as a guide - see ‘x’ in Fig. 2 - to ensure the bracket is level) with rawlplug No. 8 size fibre inserts. The plug must be located in the solid part of the wall and not just in the plaster layer. When fixing to ...

Descargar ahora

Introduzca dos números de la imagen: