Votos - 2, Puntuación media: 4 ( )

Fabricar: Globe Tamaño del archivo: 709.39 kb Nombre del archivo: Idioma del manual:

4. Turn slicer on by pulling the on/off tab towards you. The power indicator light will illuminate. DO NOT hold the food product with your hand. Never put you hand on or around food chute when slicer is on. The food chute handle is the only part of the slicer you should touch while slicing. 5. Use the food chute handle to manually push the food chute back and forth. The food chute handle is the only part of the slicer you should touch while slicing. Do not catch slices with your hand. Let slices drop on paper covered receiving area. If a product needs to be adjusted during slicing, ALWAYS pull the food chute all the way towards you. Turn off slicer, and close slicer table prior to adjusting the product and the end weight. 6. After the last slice stroke, pull the food chute all the way towards you. Turn the slicer off by pushing the on/off tab inward. The power indicator light will go out. Always turn slice thickness dial completely clockwise to close the slicer table. 7. Now you can load and unload food product from the food chute. MANUAL USE OF AUTOMATIC SLICER ALWAYS make sure the auto engage lever is in the “Manual” position before turning slicer on (Fig. 10-1). 1. Automatic slicers can be used manually when desired. 2. When manually operating an automatic slicer the auto engage lever MUST be in the “Manual” position before turning the slicer on. The lever should not be moved out of the “Manual” position at any time during use. 3. Turn the slicer on by pressing the start button. Figure 10-1 Auto Engage Lever Page 10 AUTOMATIC OPERATING INSTRUCTIONS AUTOMATIC OPERATING INSTRUCTIONS AUTOMATIC SLICER OPERATION BEFORE beginning to use the slicer for automatic slicing, MAKE SURE the auto engage lever is in the “Manual” position. Automatic slicer operation: NEVER put hand into chute arm opening on right side of slicer. Keep hands and arms away from all moving parts. 1. Make sure the slicer is turned off (power indicator light not illuminated). Make sure auto engage lever is in “Manual” position and that the food chute moves freely. 2. Pull the food chute completely towards you and load the food product. Swing the end weight into position to secure food product. 3. If the food product is too long, place the end weight on top of the food product and use the end weight prongs to hold the food product in place. 4. Auto engage lever must be in “Manual” position to start the slicer. 5. Press the start button. The power indicator light will illuminate. If the speed light is flashing, then the auto engage lever is in the “Automatic” position. Press the stop button to turn off the machine. Lower the auto engage lever to the “Manual” position and restart the unit. BE ALERT. The next step will cause the food chute to move automatically and it can move either direction on start up. 6. To make the food chute move automatically, pull or raise the auto engage lever into the “Automatic” position (Fig. 11-1). a. Model 3850 – To adjust the chute speed press the faster button for 60 strokes per minute and the slower button for 40 strokes per minute. b. Model 3975 – To adjust the chute speed press the slower or faster buttons. The slicer defaults to speed 5 when the power cord is unplugged and plugged back in. If the slicer is turned off but not Figure 11-1 unplugged, it will return to the last speed used. Auto Engage Lever NEVER attempt to adjust, load or unload food chute when slicer is in automatic operation. NOTE: Chute speed can be adjusted prior to or after auto engagement. Page 11 AUTOMATIC OPERATING INSTRUCTIONS AUTOMATIC OPERATING INSTRUCTIONS 7. To stop the automatic movement of the food chute, push down or lower the auto engage lever to the “Manual” position. The knife is still rotating even though the chute has stopped. 8. To turn slicer completely off and stop the knife, press the stop button. If the auto engage lever has not already been returned to the “Manual” position, push down or lower the lever to the “Manual” position. 9. Using the food chute handle, pull the food chute all the way towards you. Turn slice thickness dial completely clockwise to close the slicer table. Now you can load and unload food product from the food chute. 10. When finished using slicer, make sure slicer is turned off, the slice thickness dial is turned completely clockwise, and the auto engage lever is in the “Manual” position. AUTOMATIC SPEED SETTINGS MODEL # CHUTE SPEED SETTING STROKES PER MINUTE 3850 L 40 H 60 3975 1 20 2 28 3 32 4 38 5 40 6 50 7 52 8 58 9 60 Note: Strokes per minute may vary +/- 10%. Page 12 CLEANING CLEANING SHARP KNIFE BLADE TO AVOID SERIOUS PERSONAL INJURY: • BEFORE CLEANING, SHARPENING, SERVICING, OR REMOVING ANY PARTS, always turn slicer off, turn slice thickness dial clockwise to closed position, remove food chute, and unplug power cord. • NEVER attempt to clean slicer with the knife running. • NEVER attempt to remove knife or knife ring guard for cleaning. Your slicer should be cleaned and sanitized as often ...

Descargar ahora

Introduzca dos números de la imagen: