Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
2. Plug in the processor and turn the speed control dial to the desired speed level. If the processor does not come on check that the lid are correctly fitted and locked into place. Important Note: The unit will NOT operate without the lid locked into place. 3. Use the food pusher when putting food into the feeder tube. (Fig. 9) For safety reasons it is always better to use the food pusher, and to NEVER feed food by hand. Caution: DO NOToperate the unit for intervals longer than 20 seconds. If longer chopping or mixing is required, run for 20 seconds, allow motor to stop and run again for another 20 seconds. Fig. 9 4. When finished using the food processor, turn the speed control dial to the “ Off” position and unplug it from the electrical outlet. 6 1. Food Pusher 2. Feeder Tube 3. Food Processor Bowl 4. Suction Feet 5. Speed and Pulse Control 6. Blade Storage Compartment 7. Food Processor Lid 8. Blade Holder 9. Thin Shredding Blade 10. Thick Shredding Blade 11. Thin Slicing Blade 12. Thick Slicing Blade 13. Grating Blade 14. Upper Chopping Blade 15. Blade Covers ( x2) 16. Lower Chopping Blade 17. Spatula Technical Specification Voltage: 120V., 60Hz. Power: 800 Watts Food Processor Capacity: 6 cups (1.5 L) Text Box: GETTING TO KNOW YOUR VARIABLE SPEED QUAD BLADE FOOD PROCESSOR GETTING TO KNOW YOUR VARIABLE SPEED QUAD BLADE FOOD PROCESSOR SPEED AND PULSE CONTROLPulse ButtonOFF to MAX Speed Control Dial Text Box: Speed Control Dial The speed control dial has the following speed settings: Off: Turn the speed control dial to “Off” in order to stop the food processor from operating. 1 to 9: Speed levels may be increased from 1 to 9. The speed can be Speed Control DialThe speed control dial has the following speed settings: • Off: Turn the speed control dial to “ Off” in order to stop the food processor from operating. • 1 to 9: Speed levels may be increased from 1to 9. The speed can be adjusted while the food processor is in use. • Max: Highest level of speed that the food processor can operate at. • PULSE: Use of the “ PULSE” button allows greater control over the texture of the food being processed. Use " PULSE" when the unit is in the " Off" position. Caution: The " PULSE" function is only intended to be used for short periods of time. Damage to the unit may occur if not used properly. Operating the Food ProcessorOnce having assembled the food processor according to the “ Assembly Instructions” the unit is now ready for use.1. Place the lid on top of the food processor bowl. Once in place twist it to the left so that it is locked securely. (Fig. 8) Note: Until the lid is securely in place, ensure that the unit is NOT plugged into an electrical outlet. Operating InstructionsTWIST THE LID TO THE LEFT TO LOCK INTO PLACEFig. 8FOOD PUSHERFEEDER TUBE • Once the food processor bowl is securely in place, remove the protective blade covers and carefully assemble the upper and lower chopping blades. (Fig. 2 & 3) 4 Fig. 1 Fig. 4 5 Text Box: Assembly Instructions Assembly InstructionsBefore using your food processor for the first time, do the following: 1. Read all the instructions in this instruction manual. 2. Remove the unit from packaging. Warning: BLADES ARE VERY SHARP! Take extra care when removing the protective blade covers to prevent injuries. Important Note: Always replace the protective blade covers onto the blades when the blades are not in use. 3. Wash the unit and attachments according to the “Maintenance & Cleaning” section. DO NOT IMMERSE MAIN UNIT IN WATER. 4. Once the unit has been thoroughly cleaned, it is ready for assembly and use. Assembling the Food ProcessorThe food processor can be used either with both the upper and lower chopping blades or just the lower chopping blade. The food processor can also use either of the blade holders instead of the chopping blades. Note: Before assembling the food processor, ensure that it is NOT plugged into an electrical outlet. Assembling Both Chopping Blades• Place the food processor bowl securely on the main body. (Fig. 1) • After having assembled the chop- ping blades, carefully place the chopping blade assembly onto the shaft of the food processor bowl. (Fig. 4) Ensure that the blades are securely in place before continuing. FOOD PROCESSOR BOWLMAIN BODYPROTECTIVE BLADE COVERSFig. 2UPPER CHOPPING BLADELOWER CHOPPING BLADECAUTION! BLADES ARE SHARP! Fig. 3FOOD PROCESSOR SHAFTCHOPPING BLADE ASSEMBLYUsing the Lower Chopping Blade Only• Place the food processor bowl securely on the main body. (Fig. 1) • Once the food processor bowl is securely in place, remove the protective blade cover from the lower chopping blade and carefully place the lower chopping blade onto the shaft the food processor bowl. (Fig. 4) Assembly InstructionsUsing the Blade Holder• Place the food processor bowl securely on the main body. (Fig. 1) • Select the desired blade. There are five (5) different blades to choose from:1. Thin Shredding Blade2. Thick Shredding Blade3. Thin Slicing Blade4....