Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Place the chopping blade spindle (16) onto the metal pin in the centre of the bowl then place the holder & blade over the hexagonal portion of the spindle. Re-fit the bowl lid, making sure the lid seal (10) is in place and place the bowl pusher (11) into the inlet chute in the bowl lid (9). The bowl pusher should be left in place during use to prevent spills. Place the assembled bowl in the recess in the motor housing (1). Rotate the swivel head back towards the motor housing & push it down until it latches in place. Connect the appliance to a suitable electrical supply. Rotate the speed control (3) to the desired speed. Remove the pusher from the inlet chute & add the ingredients through the inlet chute, using the pusher to gently press them onto the cutting blade. Note: Never insert fingers or allow loose clothing, jewellery, hair, etc. to enter into the inlet chute. Add ingredients until the bowl is full or sufficient ingredients have been processed then rotate the control back to 0 to turn the appliance off. Press the swivel head release button (5), guiding the swivel head (2) as it lifts. Lift the bowl from the appliance. Remove the lid then take the blade carrier & spindle from the bowl before transferring the ingredients to a suitable container. The blades can be removed from the carrier by carefully pushing it in the opposite direction of assembly. Note: The large French fry blade (25) has a unique carrier (23). This cannot be used for any other blade. The large French fry blade & carrier are used in the same way as the other carrier & blades. Slicing / Shredding Guide Ingredients Quantity Speed Setting Carrots 500g 1 -3 Radish 500g 1 – 3 Squash 1,000g 1 – 3 Cucumber 1,000g 1 – 3 Cheese 500g 1 – Max Potato 500g 1 – 3 As a Blender Carefully fit the upper jug blade (29) over the lower jug blade (28) rotating the blades in a clockwise direction so they lock together. Note: The blades should be at right-angles to each other, forming an X-shape. Remove the jug lid (30) and fit the blades onto the metal pin in the centre of the bowl before replacing the lid, making sure the seal (32) is in place. Ingredients can be added to the jug while the lid is off, or by inserting them through the hole left when the jug lid cap (31) is removed. Note: Never insert fingers or allow loose clothing, jewellery, hair, etc. to enter into the inlet. Press the swivel head release button (5), guiding the swivel head (2) as it lifts. Note: The swivel head cannot be raised if the speed selector (3) is in any position other than “OFF”. Place the assembled jug in the recess in the motor housing (1). Rotate the swivel head back towards the motor housing & push it down until it latches in place. Connect the appliance to a suitable electrical supply. -6 EnglishEnglish Warning! Before performing any maintenance or Rotate the speed control (3) to the desired speed until the ingredients are blended as required then rotate the control back to 0 to turn the appliance off. The pulse button (4) can be used instead of the speed control. Press the swivel head release button (5), guiding the swivel head (2) as it lifts. Lift the bowl from the appliance. Remove the jug lid then carefully remove the spindle & blades & transfer the ingredients to a suitable container. The blades can be removed from the spindle individually, rotating them in an anti-clockwise direction. As a Juice Extractor Place the juice extractor (33) over the metal pin in the centre of the jug (27) & fit the juice extractor lid (34), making sure the seal (32) is in place. Place the juice extractor pusher (35) into the inlet chute in the juice extractor lid (34). The pusher should be left in place during use to prevent spills. Place the assembled juicer in the recess in the motor housing (1). Rotate the swivel head back towards the motor housing & push it down until it latches in place. Connect the appliance to a suitable electrical supply. Rotate the speed control (3) to the Maximum speed. Remove the pusher from the inlet chute & add the ingredients through the inlet chute, using the pusher to gently press them into the juicer. Note: Never insert fingers or allow loose clothing, jewellery, hair, etc. to enter into the inlet chute. If ingredients jam in the juicer, use the pusher. Note: If it is not possible to clear a blockage using the pusher, switch off & disconnect the appliance from the electrical supply, then raise the swivel head & open the jug to clear the blockage manually. Add ingredients until the jug is full or sufficient ingredients have been processed then rotate the control back to 0 to turn the appliance off. Press the swivel head release button (5), guiding the swivel head (2) as it lifts. Lift the bowl from the appliance. Remove the lid & juicer before transferring the ingredients to a suitable container. Maintenance Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation...