Si su artefacto no funciona correctamente al utilizarlo bajo condiciones domesticas normales dentro del periodo de garantia, devuelva el artefacto completo y los accesorios, pagando el envio, a U.S. EURO- PRO OperatingLLC, 94 MainMillStreet, Door16, Plattsburgh, NY 12901. CanadaEURO- PRO OperatingLLC, 4400 BoisFranc, StLaurent, QcH4S 1A7Si el artefacto presenta un defecto de materiales o mano de obra, EURO- PRO OperatingLLClo reparara o remplazara sin cargo. El envio debe incluir un comprobante

A scraper may be used but must be used only when the food processor is not running. 12. Blades are sharp. Handle carefully. When handling the chopper blade (C) always hold it by the plastic hub. 13. To reduce the risk of injury, never place cutting blades or discs on the base without first putting bowl properly in place. 14. Be certain cover is securely locked in place before operating appliance. 15. Never feed food by hand. Always use food pusher. 16. Do not attempt to by-pass the cover interlo

4. Using the finger holes in the blade holder, fit it over the spindle and press firmly into place as indicated. WARNING: USE EXTREME CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP. 5. Fit the lid and click into place as described in the Setting Up section (page 4). 6. Plug in the processor. 7. WARNING: USE THE FOOD PUSHER (14) TO ADD FOOD INTO THE PROCESSOR BOWL (11) THROUGH THE FEEDER TUBE. French Fry Blade (22) 1. Fit the processor bowl and spindle as detailed previously. 2. Using the finger

euro-pro.com COPYRIGHT © 2008 EURO-PRO OPERATING LLC IMPORTANT SAFEGUARDS Read Instruction Manual Before Use When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions before using the appliance. It is suggested that you keep these instructions in a safe place for future reference. 2. Your voltage must correspond to the voltage printed on the bottom of the appliance. 3. To protect against electrical shock, do not immers

• To remove the blade from the blade holder, push the blade from the back of the blade holder. (Fig. 8) BACK OF BLADE HOLDER PRESS DOWN ON BACK OF BLADE Fig. 8 Caution: Handle blade carefully to avoid cuts and injuries. Speed Control Dial The speed control dial has the following speed settings: • Off: Turn the speed control dial to “ Off” in order to stop the food processor from operating. • 1 to 9: Speed levels may be increased from 1 to 9. The speed can be adjusted while the food processor is

PRODUCT QUANTITY RECOMMENDED SPEED ACCESSORY USED Onions / Garlic 2 cups Max / Pulse Chopping blade Parsley 1 cup Max / Pulse Chopping blade Raw Meat 2 cups Max / Pulse Chopping blade Meat ( cooked) 2 cups Max / Pulse Chopping blade Nuts 1 . cups Max / Pulse Chopping blade Fruits (cut in small pieces) 2 . cups Max / Pulse Chopping blade Carrots ( cooked) 2 cups Max / Pulse Chopping blade Hard Boiled Eggs 4 eggs Max / Pulse Chopping blade Mayonnaise Max 4 cups Max / Pulse Whipper Whipping cream 1

Do not tryto remove it. (fig. 12) 1. Make sure that the blade storage cover is closed during use. 2. Fit the processor bowl and spindle as detailed previously. 3. Using the finger holes in the french fry blade holder, fit it over the spindle and press firmly into place as indicated. (fig. 13) WARNING: USE EXTREME CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP. 4. Fit the lid and click into place as indicated in Setting Up section (page 4). 5. Plug in the processor. 6. WARNING: USE THE FOOD PUSHE

Never feed food by hand. Always use food pusher. 16. Do not attempt to by-pass the cover interlock mechanism. 17. Always operate food processor with the cover in place. 18. Always operate the blender with the cover in place. 19. When blending hot liquids, remove the center piece of the two-piece blender cover. SAVE THESE FOR HOUSEHOLD IMPORTANT NOTICE This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized

com IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions before using your 15. DO NOT use the appliance if Ninja Master Prep. chopping blades are bent or 2. Close supervision is necessary when damaged. any appliance is used by or near 16. Avoid contact with moving parts at children. all times. Keep hands, hair, 3. To protect against electric shock, DO clothing as well as spatulas and

11/05B 13. Be sure that the chopper bowl lid is locked securely in place before operating the appliance. Do not attempt to defeat the lid interlock mechanism. 14. Keep hands, hair, clothing, spatulas and other utensils away during operation to reduce the risk of injury to persons and damage to the appliance. 15. This appliance is intended for small quantities of food; it is not intended to prepare large quantities of food at one time. 16. Avoid running the mini chopper for more than thirty (30)