Iniciar sesión:
Votos - , Puntuación media: ( )

Manual de usuario Xyron, modelo 850

Fabricar: Xyron
Tamaño del archivo: 135.29 kb
Nombre del archivo: 8030820a-7188-4bd0-a790-138d77effcde.pdf

Idioma del manual:en

El documento se está cargando, por favor, espere
El documento se está cargando, por favor, espere

Resumen del manual


AT: Single - sided adhesive transfer. Please follow the attached directions carefully. User's Guide XYRON® 850 XYRON® 1200 Important Notice : Your Xyron 850 / Xyron 1200 system is designed to permanently attach a clear film or adhesive to the front and/or back of any substrate that is run through the machine. The lamination film and adhesive are not designed to be removed without substantial damage to the laminated substrate. This process is NOT recommended for any precious or single source documents. GB GB Parts and Functions Handle Cut Blade Document Used to advance Output cartridge supplies Location where when rotated document exits clockwise. Also, dispenser when feeds document handle is rotated through dispenser. clockwise. Roller Springs Provide spring force on rollers. Remove springs to remove rollers Slides to the left and right to cut output and cut-blade. material after it exits dispenser. Also can be used to trim excess material from leading edge of document. Setting Up Remove the Xyron System and Document Feed Tray from the packaging. The System is shipped with a sample supply cartridge already installed. Install the feed tray by inserting it horizontally into the cartridge opening by the grooves in the left and right dispenser side plates as shown below. When correctly Document Feed Tray Used to guide document into dispenser. Leading edge of document slides in between tray and paddle during insertion. Align to right for A3/A4 documents, to the left for letter documents. Document Feed Paddle Helps ensure wrinkle-free output by providing slight back-tension on document. Replaceable Supply Cartridge Holds various lengths and combinations of film and adhesive depending upon application. installed, the tray will rest horizontally. Lower groove in dispenser side plates Upper groove in dispenser side plates Basic operation Step 1 - Insert and align document on feed tray. Extend the document completely into the cartridge opening. Align to the left for letter size documents, to the right for A3/A4 documents. Document Feed Tray Assembly Cartridge (reference) Step 2 - Gently guide the document forward while turning the handle clockwise. Step 3 - Trim to desired length using the cut blade at the roller exit. Apply pressure down on the orange blade holder and slide to the left or right. Cartridge Replacement To Install New Cartridges To Install Part-used Cartridges Position cartridge leader between the rubber rollers in dispenser. Turn handle clockwise to advance film Insert new supply cartridge. Continue to turn handle until film is aligned and wrinklefree. Install feed tray and trim off excess film using cut blade. Attach reusable cartridge starter tool to partially used supply cartridge. Insert partially used supply cartridge into dispenser. Note: tool should be positioned between rubber rollers in dispenser. Turn handle clockwise until tool has exited dispenser and film is aligned and wrinkle-free. Store reusable cartridge starter tool for la...

Otros modelos de este manual:
Laminador - Xyron 850, 1200 (135.29 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría