- 5 Fig. 2 9. Preparing for cold lamination • If you have previously performed hot lamination: After hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Remember, the rollers inside the laminator will still be hot. These can damage the laminating pouch and the document to be laminated! . Insert the pouch guide q into the holes provided on the rear of the laminator. . If not already done, fold the trimming attachment d down. . Pull the document suppo

Intended use 2 2. Items supplied 2 3. Appliance description 2 4. Technical Data 2 5. Safety instructions 3 6. Suitable laminating pouches 4 7. Operating levels 4 8. Preparing for hot lamination 5 9. Preparing for cold lamination 6 10. Lamination process 6 11. Anti-Blocking Switch (ABS) 7 12. Trimming function 7 13. Cleaning and care 8 14. Storage 8 15. Disposal 8 16. Warranty and Service 9 17. Importer 9 Read these operating instructions carefully before using the appliance for the first time an

sheet size - DIN A4 Safety instructions Injury hazard • This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. • Children should be supervised to ensure that they do not play with the appliance. • Unplug the power cable afte

• Ensure the appliance has a secure positioning. • Do not operate the appliance if it has fallen or is damaged. Arrange for the appliance to be checked and, if needed, repaired by experts. • Some parts of the appliance become very hot during operation. To avoid burns, do not touch these parts. - 5 6. Suitable laminatingpouches • For hot lamination you can use pouches with a width of up to 230 mm and a thickness of maximum 125 Micron. • Please note that each laminating pouch may only be used once

. Insert the plug of the laminator into a mains power socket. . Provide a firm location for the appliance. . Set the selector switch for hot and cold lamination i to "HOT ". . Set the foil thickness switch o to the desired foil thickness (80 or 125 microns). The red ON/OFF indicator lamp u will now glow. The laminator heats itself up to its operating temperature. • As soon as the green indicator lamp "Ready" y glows, the laminator has reached its operating temperature. • Attainment of the operat