Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
. When you close the switch, the AIS 300 powers on. When you open the switch, the AIS 300 powers off. Connecting a VHF Antenna to the AIS 300 To transmit and receive AIS information, the AIS 300 must be connected to a VHF antenna (not included). Connect a marine VHF antenna to the AIS 300 using the antenna port on the device. If you have a VHF radio on your boat, connect the VHF radio to the AIS 300 using the included RF interconnect cable according to the wiring layout diagrams starting on page 2. Mount the antenna according to the installation instructions provided with the antenna. Connecting the AIS 300 to a NMEA 2000 Network (optional) You can connect the AIS 300 to a NMEA 2000-compliant chartplotter using your existing NMEA 2000 network, or you can build a basic NMEA 2000 network if you do not have one on your boat. For more information on NMEA 2000, and to purchase required cables and connectors, go to The AIS 300 wiring layout diagram on page 2 contains an example of the AIS 300 connected to a Garmin chartplotter through a NMEA 2000 network. Note: If you are unfamiliar with NMEA 2000, see the “NMEA 2000 Network Fundamentals” chapter in the Technical Reference for Garmin NMEA 2000 Products for more information. Visit and click on “Manuals” on the AIS 300 page. AIS 300 Installation Instructions Connecting the AIS 300 to a NMEA 0183 Device (optional) You can connect the AIS 300 to a NMEA 0183-compliant chartplotter using the bare wires on the AIS 300 power/data cable. Connect NMEA 0183 bare wires to a Garmin chartplotter as indicated in the wiring layout diagram on page 3. Consult the diagram below to connect the AIS 300 to a non-Garmin chartplotter. Use 22 AWG wire for extended runs of NMEA 0183 wire, if needed. If it is necessary to extend the power wires, use 16 AWG or larger wire. +- > > > > NMEA0183- compliantchartplotterAIS300receiverboxBattery1 or 4VdcGray[TxA(+)] Pink[TxB(-)] Red[power(+)] Black[ground(-)] RxA(+) RxB(-) Power+ Ground- Wirecolor[function] WirefunctionFuse AOrange/white[speedselect] Unconnected=38400(highspeed) Connectedtobatterynegative(-)=4800(standardspeed) Yellow[powertoggle—page4] Connecting the AIS 300 to a Non-Garmin NMEA 0183 Device Notes: • ConsulttheinstallationinstructionsforyourNMEA0183-compliantdevicetoidentifythereceiving(RX)A(+)andB(-)wires. • IfyourNMEA0183-compliantdevicehasonlyonereceivingwire(Rx),connectittothegraywire[TxA(+)]fromtheAIS300,and leave the pink wire [Tx B (-)] wire unconnected. • TheAIS300cantransmitNMEA0183datausingeither38400baud(default)or4800baud.Connecttheorange/whitewirefromthe AIS 300 power/data cable to the negative (-) battery terminal if you would like to limit the output speed to 4800 baud. Refer to the documentation provided with your chartplotter to determine the correct NMEA0183 baud rate. using the AIS 300 If you connected the AIS 300 to a chartplotter using either NMEA 2000 or NMEA 0183, refer to the Owner’s Manual provided with your chartplotter for information on using the AIS-specific features of the chartplotter. If you did not connect the AIS 300 to a Garmin chartplotter, ensure that you connected a power toggle switch using the yellow wire on the AIS 300 power/data cable (see page 4). When you want to turn on the AIS 300, close the switch. When you want to turn off the AIS 300, open the switch. AIS 300 Installation Instructions AIS 300 Installation Instructions Appendix Specifications Dimensions: W . H . D: 8 5/32 . 5 17/32 . 1 25/32 in. (207 . 140.6 . 45.7 mm) Weight: 1 lb. 7.6 oz. (670 g) Temperature Range: from -4.F to 158.F (from -20.C to 70.C) Compass-safe Distance: 15 3/4 in. (40 cm) Waterproof Rating: IEC 60529 IPX7 (Immersion in 1 meter of standing water for 30 minutes) Power Source: 9.6–31.2 Vdc (12 Vdc or 24 Vdc boat battery) Usage: 2.5 W max Fuse: 5 A fast-acting NMEA 2000 Power Usage: LEN=2 Antenna Antenna Connector: PL259 Antenna Port Impedance: 50 . NMEA 2000 PGN Information Receive Transmit 059392 ISO Acknowledgment 059392 ISO Acknowledgment 059904 ISO Request 060928 ISO Address Claim 060928 ISO Address Claim 126208 NMEA Request/Command/Acknowledge Group Function 126208 NMEA - Command/Request/Acknowledge Group Function 126464 PGN List 126992 System Time 126996 Product Information 129038 AIS Class A Position Report 129039 AIS Class B Position Report 129040 AIS Class B Extended Position Report The Garmin AIS 300 is NMEA 2000 certified. 129794 AIS Class A Static and Voyage Related Data 129798 AIS SAR Aircraft Position Report 129802 AIS Safety Related Broadcast Message 129809 AIS Class B “CS” Static Data Report, Part A 129810 AIS Class B “CS” Static Data Report, Part B NMEA 0183 Communication Information When connected to a NMEA 0183 device, the AIS 300 transmits the VDM sentence. Product Registration Help us better support you by completing our online registration today. Go to Keep the original sales receipt, or a photocopy, in a safe place. Co...
Otros modelos de este manual:equipamiento barco - 190-01178-00 (1.62 mb)
equipamiento barco - AIS 300 (1.62 mb)