Votos - 5, Puntuación media: 3.2 ( )

Fabricar: Kenwood Tamaño del archivo: 373.97 kb Nombre del archivo: Idioma del manual:

Cleaning the If the terminals on dirty, wipe them with a dry, soft cloth. Cleaning the Unit If the faceplate of this unit is with a dry soft cloth such as a silicon If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off. Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. About Cassette tape Cleaning the tape head When there’s noise or the sound quality is bad during tape play the tape head maybe dirty, clean the tape head. About Cassette tape • If the tape is slack tighten it. • If the cassette tape label is peeling off glue it on again. • Don’t use deformed cassette tape. • Don’t place cassette tape on the dashboard etc. where the temperature is high. • Don’t use cassette tape that’s 100 minutes long or longer. About RDS RDS (Radio Data When listening to programme service displayed, advising you being received. RDS (Radio Data System) stations transmit frequency data for the When you are making long trips, automatically alternative switches to particular frequency with the best reception for the particular network of stations that want to listen to. The data is automatically stored, allowing you to switch quickly to another RDS stations, broadcasting the same programme, that has better reception. These include stations stored in the station preset memory that you often listen to. Enhanced Other Network Stations that offer also transmit information about other RDS stations that have traffic information. When you are tuned to a station that is not transmitting traffic information, but another RDS station starts transmitting a traffic bulletin, the tuner automatically switches to the other station for the duration of the bulletin. Alarm When an emergency transmission (announcing disasters, etc.) is sent, all current functions are interrupted to allow the warning to be received. — 4— General General Release button SRC/ u PWR OFF CLK 4 FM . d ATT/ AUD AM #1 - 5 LOUD Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [PWR OFF] button Volume Increasing Volume Press the [ u] button. Decreasing Volume Press the [ d] button. Attenuator ATT indicator Turning the volume down quickly. Press the [ATT] button. Each time the button is pressed the Attenuator turns ON or OFF. When it’s ON, the "ATT" indicator blinks. LOUD indicator — 5— General General Selecting the Press the [SRC] button. Source required Display Tuner "TUNER" Tape "TAPE" External disc (KRC-291/ 26 only) "DISC" Standby (Illumination only mode) "ALL OFF" This unit automatically turns full power OFF in Standby mode in order to save the vehicles The time until full power OFF can be set in Otros modelos de este manual:
Receptores - B64-2106-00 KRC-16 (373.97 kb)
Receptores - B64-2106-00 KRC-26 (373.97 kb)
Receptores - B64-2106-00 KRC-291 (373.97 kb)
Unidad - KRC-16 (373.97 kb)

Descargar ahora

Introduzca dos números de la imagen: