Votos - 2, Puntuación media: 5 ( )

Fabricar: Homelite Tamaño del archivo: 1.08 mb Nombre del archivo: Idioma del manual:

(4.4 kg.) Trim ‘n Edge (UT20022, UT20022A, UT20023, UT20023A) ................................................................... 10 lbs. (4.5 kg.) Easy Reach (UT20042, UT20042A, UT20043, UT20043A)................................................................. 10.6 lbs. (4.8 kg.) String cutting width ...................................................................................................................................... 17 in. (432 mm) Engine displacement .................................................................................................................................................... 25cc String diameter .......................................................................................................................................... .080 in. (2.0 mm) UNPACKING INSTRUCTIONS ¦ ¦¦¦¦¦Carefully remove the product from the carton. ¦ ¦¦¦¦¦Inspect the product to make sure no breakage or damage occurred during shipping. ¦ ¦¦¦¦¦Do not discard the packing material until you have inspected and operated the product. ¦ ¦¦¦¦¦If any parts are damaged or missing, please call 1-800-242-4672 for assistance. WARNING: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. PACKING LIST ¦ ¦¦¦¦¦Trimmer Assembly ¦ ¦¦¦¦¦Owner’s Kit ¦ ¦¦¦¦¦Front handle ¦ ¦¦¦¦¦Curved Shaft Grass deflector ¦ ¦¦¦¦¦Edger Guide - Trim ‘n Edge ¦ ¦¦¦¦¦Hardware Bags (2) - Trimlite and Easy Reach ¦ ¦¦¦¦¦Hardware Bags (3) - Trim ‘n Edge ¦ ¦¦¦¦¦Bottle of 2-Cycle Oil ¦ ¦¦¦¦¦Operator's manual Page 7 FEATURES .......................................................................................................................................... Fig. 1a THROTTLE TRIGGER STARTER GRIP CHOKE LEVER REAR HANDLE FRONT HANDLE DRIVE SHAFT HOUSING STRING HEAD CURVED SHAFT GRASS DEFLECTOR STOP BUTTON PRIMER BULBTrimlite model UT20002, UT20002A, UT20003, UT20003A Page 8 Page 9 .... .... .. ........ .... .............. .. ...... .... ...... .. STSTOPOP A B C...... .. .... .. .......... ............ .... ........ ........ ...... .. ...... .. .... STSTOPOP A B C.. ......FEATURES Fig. 1b Fig. 1c EDGER ATTACHMENT (TRIM ‘N EDGE ONLY) THROTTLE TRIGGER STARTER GRIP CHOKE LEVER REAR HANDLE FRONT HANDLE DRIVE SHAFT HOUSING STRING HEAD CURVED SHAFT GRASS DEFLECTOR STOP BUTTON PRIMER BULB THROTTLE TRIGGER STARTER GRIP CHOKE LEVER REAR HANDLE FRONT HANDLE DRIVE SHAFT HOUSING STRING HEAD STRAIGHT SHAFT GRASS DEFLECTOR STOP BUTTON PRIMER BULB Trim ‘n Edge model UT20022, UT20022A, UT20023, UT20023A Easy Reach models UT20042, UT20042A, UT20043, UT20043A ASSEMBLY If your unit has been preassembled, check each step to make sure the unit has been properly assembled. FRONT HANDLE See Figure 2. 1. Remove the front handle, bolt, and wing nut from the Owner’s Kit. 2. Install the front handle onto the top side of the drive shaft housing and move it to a comfortable position. 3. Place the bolt through the front handle as shown, then install the wing nut. 4. Tighten wing nut securely. CURVED SHAFT GRASS DEFLECTOR WITHOUT EDGER GUIDE - TRIMLITE AND TRIM ‘N EDGE See Figure 3. 1. Remove wing nut, flat washer, lock washer, and bolt from the Owner’s Kit. 2. Place curved shaft grass deflector over shaft and bracket. 3. Install bolt through the slots in the tabs on grass deflector and bracket on shaft housing. 4. Install flat washer, lock washer and wing nut. 5. Tighten Securely. CURVED SHAFT GRASS DEFLECTOR WITH EDGER GUIDE - TRIM ‘N EDGE ONLY EDGER GUIDE ASSEMBLY See Figure 4. 1. Assemble the two plastic pieces of the edger guide together using the short bolt, flat washer, lock washer and wing nut. 2. Slide the edger guide to adjust it to the desired trimming length. 3. Tighten the wing nut securely. .....................................................

Descargar ahora

Introduzca dos números de la imagen: