. Standard CMOS Features Use this menu to configure the system time and date, hard drive types, and the type of errors that stop the system boot, etc. . Advanced BIOS Features Use this menu to configure the device boot order, advanced features available on the CPU, and the primary display adapter. . Integrated Peripherals Use this menu to configure all peripheral devices, such as SATA, USB, integrated audio, and integrated LAN, etc. . Power Management Setup Use this menu to configure all the power-saving functions. . PC Health Status Use this menu to see information about autodetected system/CPU temperature, system voltage and fan speed, etc. . Load Fail-Safe Defaults Fail-Safe defaults are factory settings for the most stable, minimal-performance system operations. . Load Optimized Defaults Optimized defaults are factory settings for optimal-performance system operations. . Set Supervisor Password Change, set, or disable password. It allows you to restrict access to the system and BIOS Setup. A supervisor password allows you to make changes in BIOS Setup. . Set User Password Change, set, or disable password. It allows you to restrict access to the system and BIOS Setup. A user password only allows you to view the BIOS settings but not to make changes. . Save & Exit Setup Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing can also carry out this task.) . Exit Without Saving Abandon all changes and the previous settings remain in effect. Pressing to the confirmation message will exit BIOS Setup. (Pressing can also carry out this task.) 2-3 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2011 Award Software MB Intelligent Tweaker(M.I.T.) Item Help Menu Level . } IGX Configuration [Press Enter] CPU Clock Ratio [Auto] 2400Mhz CPU NorthBridge Freq. [Auto] Core Performance Boost (Note) [Enabled] CPB Ratio (Note) [Auto] 2700Mhz CPU Host Clock Control [Auto] x CPU Frequency(MHz) 100 PCIe Spread Spectrum [Disabled] Set Memory Clock [Auto] x Memory Clock x6.66 1333Mhz } DRAM Configuration [Press Enter] ******** System Voltage Optimized ******** System Voltage Control [Auto] x CPU PLL Voltage Control Auto x DDR3 Voltage Control Auto x DDR VTT Voltage Control Auto x FCH Voltage Control Auto x APU VDDP Voltage Control Auto x CPU NB VID Control Auto x CPU Voltage Control Auto Normal CPU Vcore 1.3625V ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2011 Award Software MB Intelligent Tweaker(M.I.T.) Item Help Menu Level . ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Whether the system will work stably with the overclock/overvoltage settings you made is dependent •• on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) When the System Voltage Optimized item blinks in red, it is recommended that you set the System •• Voltage Control item to Auto to optimize the system voltage settings. (Note) This item is present only when you install a CPU that supports this feature. IGX Configuration CMOS Setup Utility-Copyright (C) 1984-2011 Award Software IGX Configuration Item Help Menu Level .. UMA Frame Buffer Size [Auto] VGA Core Clock control [Auto] x VGA Core Clock(MHz) 600 ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults UMA Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 256MB, 512MB, 1024MB. VGA Core Clock control Allows you to determine whether to manually set the VGA Core clock. (Default: Auto) VGA Core Clock(MHz) Allows you to manually set the VGA Core clock. The adjustable range is from 300 MHz to 2000 MHz. This item is configurable only when the VGA Core Clock control option is set to Manual. CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being used. CPU NorthBridge Freq. Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is dependent on the CPU being used. Core Performance Boost (Note) Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU performance-boost technology. (Default...
