Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Bravetti Tamaño del archivo: 39.36 kb Nombre del archivo: EP565-575_Assembling_stand_for_hand_mixer_B.pdf Idioma del manual:

Rinse and dry. • Place the Bottom of the Stand (B) on a flat surface. • While holding the Mixer Shelf (A) push it down onto the Bottom of the Stand (B) so that the protruding pegs of the Mixer Shelf (A) slide down the side and eventually lock into the holes on the Bottom of the Stand (B). • Place the mixer on the Mixer Shelf by sliding the mixer forward into position so that the front of the mixer locks in place. • The mixer is placed in the upright position on the stand by pushing open the Locking flap (C) on the rear of stand and pulling the Mixer Shelf (A) backwards. • Place Beaters or Dough Hooks into beater receptacles while mixer is assembled onto Mixer Shelf in the upright position. Push Flap (C) to Open and Release to Vertical Position For information or assistance: EURO-PRO Operating LLC Boston, MA 02465 Tel.: 1 (800) 798-7398 www.euro-pro.com...

Descargar ahora

Introduzca dos números de la imagen: