Votos - 4, Puntuación media: 4.3 ( )

Fabricar: Hobart Tamaño del archivo: 2.59 mb Nombre del archivo: Idioma del manual:

3. Slide the agitator up the agitator shaft until it stops and latches (Fig. 6). To Remove 1. Open the wire cage. 2. Lower the bowl by pressing and holding the down arrow on the bowl switch. 3. Hold the agitator and pull the plunger of the agitator out (Fig. 7). Slide agitator down off the agitator shaft. Fig. 6 Fig. 7 – 10 – POWER BOWL LIFT POWER BOWL LIFT Fig. 8 To raise the bowl, the bowl must be in the locked position. Push and hold the up arrow on the bowl switch. To lower the bowl, push and hold the down arrow on the bowl switch. To Raise the Bowl While Mixing To raise the bowl while the agitator is mixing the product (when required by recipe or when using the Bowl Scraper Attachment): 1. Close the wire cage, then select a mixing speed on the SPEED dial. 2. Select a count-down time or HOLD for continuous count-up mixing. 3. While pressing and holding the up arrow on the bowl switch, press and hold the START button. The mixer runs only in stir speed while the bowl is rising. 4. When the bowl reaches the mix position, release the START button. The mixer automatically changes to the selected mixing speed. NOTE: Mixing speed and time can be adjusted any time during the mixing operation without stopping the mixer. – 11 – PREPARE FOR MIXING 1. Open the wire cage. 2. Place the mixing bowl on the bowl support. 3. Pour ingredients into the bowl. 4. Swing the bowl back to the locked position. 5. Place the agitator inside the bowl, then attach it to the agitator shaft. 6. Return the wire cage to front-center position. 7. Push and hold the up arrow on the bowl switch until the bowl reaches the mix position and stops. 8. The mixer is now ready for mixing. (See Timer Operation.) Fig. 14 TIMER OPERATION Using the Count-Up Mode (Continuous Mixing) 1. Turn the SPEED dial to select a mix speed (the SPEED setting can be changed at any time during the mixing operation). NOTE: STIR is to be used for incorporating ingredients. Do not use to develop dough products. 2. Set the timer on hold by turning the TIME selector counterclockwise until "Hold" appears in the TIME window. 3. Press the START button to begin mixing. The timer starts counting forward from 00:00. NOTE: If the wire cage is opened at any time, the mixing operation will stop. To resume the mixing operation, close the wire cage and press the START button. 4. Use the STOP button to stop the mixer; the mixing time is displayed in the TIME window. 5. Press the START button to resume mixing if needed. NOTE: When the timer reaches 50:00 minutes, it will rollover to 00:01 and continue counting until the STOP button is pressed. – 12 – Using the Count-Down Mode (Timed Mixing) Using the Count-Down Mode (Timed Mixing) . Turn the SPEED dial to select a mix speed. a. If the count-up mode was used for the previous batch, the desired time needs to be entered. b. If the count-down mode was used for the previous batch, the previous time will be ...

Descargar ahora

Introduzca dos números de la imagen: