Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
This does not operate in Magiclnfo mode. • Get the PIP ON / OFF Status Introduction Header command 0xAA 0x3C ID DATA Length 0 Checksum • Set the PIP ON / OFF Header command ID DATA Length DATA Checksum 0xAA 0x3C 1 PIP PIP : The PIP ON / OFF code to set for the TV or Monitor 1 : PIP ON 0 : PIP OFF • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘A' 0x3C PIP Check Sum PIP : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘N' 0x3C ERR Check Sum ERR : Error code that shows what occurred error is • Auto Adjustment Control (PC, BNC Only) • Function Personal Computer controls PC system screen automatically. • Get Auto Adjustment Status None • Set Auto Adjustment Header command DATA DATA ID Length Checksum 0xAA 0x3D 1 Auto Adjustment Auto Adjustment : 0x00 (Always) Ack Introduction Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check 0xAA 0xFF 3 ‘A' 0x3D Auto Adjustment Sum • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘N' 0x3D ERR Check Sum ERR : Error code that shows what occurred error is • Video Wall Mode Control • Function Personal Computer converts Video Wall Mode of TV or Monitor when Video Wall is ON. Only works with TV or Monitor where Video Wall is on. Does not operate in Magiclnfo • Get Video Wall Mode Header command 0xAA 0x5C ID DATA Length 0 Checksum • Set Video Wall Mode Header command DATA DATA ID Length Checksum 0xAA 0x5C 1 Video Wall Mode Video Wall Mode : Video Wall Mode code to be set on TV or Monitor 1 : Full 0 : Natural • Ack Header com- mand 0xAA 0xFF ID DATA Length Ack/Nak r-CMD Val1 3 ‘A' 0x5C Video Wall Mode Check Sum Video Wall Mode : same as above Introduction • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘N' 0x5C ERR Check Sum ERR : Error code that shows what occurred error is • Safety Lock • Function Personal Computer turns Safety Lock function of TV or Monitor ON / OFF. Can operate regardless of whether power is ON / OFF. • Get Safety Lock Status Header command 0xAA 0x5D ID DATA Length 0 Checksum • Set Safety Lock Enable / Disable Header command ID DATA Length DATA Checksum 0xAA 0x5D 1 Safety Lock Safety Lock : Lock code to be set on TV or Monitor 1 : ON 0 : OFF • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check 0xAA 0xFF 3 ‘A' 0x5D Safety Lock Sum Safety Lock : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check 0xAA 0xFF 3 ‘N' 0x5D Safety Lock Sum ERR : Error code that shows what occurred error is Connections Connecting a Computer O There are several ways to connect the computer to the monitor. Choose one from the following options. CD Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [RGB/COMPONENTIN] port on the back of your LCD Display and the 15 pin D-sub Port on the computer. CD Using the DVI (Digital) connector on the video card. • Connect the DVI Cable to the [DVI IN] port on the back of your LCD Display and the DVI port on the computer. Connections Using the DP (Digital) connector on the video card. • Connect the [DP IN] port on the LCD Display to the DP port on the PC using the DP cable. m Using the HDMI (Digital) connector on the video card. Connect the [HDMI IN 1] I [HDMI IN 2] port on the LCD Display to the HDMi port on the PC using the HDMi cable. l-il- Note Select HDMI2 or HDMI1 as an input source when connected to the PC via an HDMI cable. To obtain normal picture and audio from the PC, HDMI2 or HDMI1 must be selected before PC is selected in Edit Name. To enable audio when DVI Device is selected, be sure to establish the connection using step ( ). О Connect the Audio cable for your LCD Display to the AUDIO port on the back of the LCD Display. О Connect the power cord for your LCD Display to the POWER port on the back of the LCD Display. Turn on the power switch. I Note Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices lS I Note • AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display. • The LCD Display 's configuration at the back may vary slightly depending on the LCD Display model. Connections 1. Connect an audio cable to [AV/COMPONENTAUDIO IN (R-AUDIO-L)]on the product and the audio port on an external device such as a VCR or DVD player. 2. Connect a video cable to [AV IN] on the product and the video output port on the external device. 3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted. 4. Press SOURCE on the product or remote control and select "AV". Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder....
Otros modelos de este manual:Monitores - 320MX-3 (5.91 mb)
Monitores - 320MXN-3 (5.91 mb)