Votos - 4, Puntuación media: 3.8
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
20 seconds is the default value. Display Mode You can see the frequency, the polarity of the operational signals and the resolution level. Note : These screens do not allow any changes to the settings, they are for information only. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Display Mode screen is displayed. User’s Manual On-Screen Display User’s Manual On-Screen Display Menu How to adjust Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. 1. Push the Auto button. Auto Adjustment To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on. OSD Lock/Unlock 1. Push and hold in the Menu ( ) button for 5 seconds or more to Lock the OSD. 2. Push and hold in the Menu ( ) button for 5 seconds or more to Unlock the OSD. User’s Manual On-Screen Display User’s Manual On-Screen Display (SyncMaster 171T) 1. Use this button to open the OSD and activate a highlighted menu item. 2.3 Use these buttons to highlight and adjust items using the On Screen Display. These buttons are also direct access buttons for the brightness feature. 4. Use this button to Exit the active menu or the OSD On Screen Display Menu How to adjust Brightness Adjust the Brightness. 1 Push the Menu ( ) button. 2 Push the Menu ( ) button to open the Brightness adjustment screen. 3 Use the + button to increase the brightness or - button to decrease the brightness. Contrast Adjust the Contrast. 1 Push the Menu ( ) button. 2 Push the -button or + button until the Contrast screen is displayed. 3 Push the Menu ( ) button to open the Contrast adjustment screen. 4 Use the + button to increase the contrast or - button to decrease the contrast. Note: Not Available This function doesn't work in Digital input. On Screen Display Menu How to adjust Image Lock Fine Image Lock is used to fine tune and get the best image by removing noises that creates unstable images with jitters and shimmers. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. 1 Push the Menu ( ) button. 2 Push the -button or + button until the Image Lock screen is displayed. 3 Push the Menu ( ) button twice to open the Fine adjustment screen. 4 Use the - or + buttons to remove any noise. Note: Not Available This function doesn't work in Digital input. Coarse Image Lock is used to fine tune and get the best image by removing noises that creates unstable images with jitters and shimmers.If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. 1 Push the Menu ( ) button. 2 Push the -button or + button until the Image Lock screen is displayed. 3 Push the Menu ( ) button again and then press the - or + button until the Coarse screen appears. Push the Menu ( ) button to open the Coarse adjustment screen. 4 Use the - or + buttons to remove any noise. Note: Not Available This function doesn't work in Digital input. On Screen Display Menu How to adjust Position H-Position Follow these instructions to change the horizontal position of the monitor's entire display. 1 Push the Menu ( ) button. 2 Push the - button or + button until the Position screen is displayed. 3 Push the Menu ( ) button twice to open the H-Position adjustment screen. 4 Use the - and + buttons to change the horizontal position of the monitor's viewing area. Note: Not Available This function doesn't work in Digital input. V-Position Follow these instructions to change the vetical position of the monitor's entire display. 1 Push the Menu ( ) button. 2 Push the - button or + button until the Position screen is displayed. 3 Push the Menu ( ) button again and then press the - or + button until the V-Position screen appears. Push the Menu ( ) button to open the V-Position adjustment screen. 4 Use the - and + buttons to change the vertical position of the monitor's viewing area. Note: Not Available This function doesn't work in Digital input. On Screen Display Menu How to adjust Reset Geometry Reset Geometry parameters are replaced with the factory default values. 1 Push the Menu ( ) button. 2 Push the -button or + button until the Reset screen is displayed. 3 Push the Menu ( ) button twice to open the Geometry Reset adjustment screen. 4 Push the + button to select Yes. If you don't want to reset the monitor, use the -button to select No. Note: Not Available This function doesn't work in Digital input. Color Reset Color parameters are replaced with the factory default values. 1 Push the Menu ( ) button. 2 Color parameters are replaced with the factory default values. 3 Push the Menu ( ) button again and then press the - or + button until the Color Reset screen appears. Push the Menu ( ) button to open the Color Reset adjustment screen. 4 Push the + button to select Yes. If you don't want to reset the monitor, use the -button to select No. Note: Not Av...