Votos - 6, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Do not unplug the power cord while the product is in use. -Electrical shock can damage the product. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. A1 Safety Precautions Precautions in installing the Product Warning Keep away from heat sources like electrical heaters, curdles or other open flames. -Electrical shock, fire, malfunction or deformation may occur. Keep the packing anti-moisture material or vinyl packing out of the reach of children. -Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. Do not put heavy objects on the product on sit upon it. -If the product collapses or is dropped, you may be injured. Children must pay particular attention. Do not leave the power or signal cable when someone can trip over it. -The passerby can falter, which can cause electrical shock, fire, product breakdown or injury. Install the product in a neat and dry place. Do not use near water. -Dust or moisture can cause electrical shock, fire or product damage. Do not add accessory that have not been designed for this display. If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and contact the service center. -If you continue to use without taking proper measures, electrical shock or fire can occur. If you dropped the product or the case is broken, turn off the product and unplug the power cord. -If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center. Do not drop an object on or apply impact to the product. Do not throw any toys or objects at the product. -It can cause injury to humans, problems to the product and damage the display. Keep out of reach of children and do not place toys near the product. Make sure the product ventilation hole is not blocked. Install the product more than 10cm from the wall. -If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat build-up. Do not cover the product with cloth or other material (eg. plastic) while plugged in. -The product can be deformed or fire can break out due to internal overheating inside the product. Place the product on a flat and stable surface that is large enough to support the product. -If the product is dropped, you may be injured or the product may be broken. Install the product where no Electromagnetic Interference occurs. Keep the product away from direct sunlight. -The product can be damaged. Do not place the product on the floor. -Small Children and others may trip over it. Precautions in Moving the Product Warning Make sure to turn off the product. -You may be electrocuted or the product can be damaged. Make sure to remove all cables before moving the product. -You may be electrocuted or the product can be damaged. When lifting or moving the product, do not hold it upside down while holding only the stand. -This may cause the product to fall resulting in damage or injury. Do not shock the product when moving it. -You may be electrocuted or the product can be damaged. A2 Safety Precautions Precautions in Using/Cleaning the Product Warning Do not attempt to disassemble, repair or modify the product yourself. - Fire or electric shock can occur. - Contact the service center for repair. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth. Or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol) Keep the product away from water. - Fire or electric shock accident can occur. Avoid high temperatures and humidity. Do not put or store flammable substances near the product. - There is a danger of explosion or fire. Keep the product clean at all times. Take a comfortable and natural position when working with a product to relax the muscles. Take a regular break when working with a product for a long time. Do not press on the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it. Keep proper distance from the product and rest from time-to-time. - Your vision may be impaired if you look at the product too closely or fpr too long. Set the appropriate resolution by referring to the User’s Guide. - Your vision can be impaired. Keep small accessories out of the reach of children. Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;wipe in one direction only. Too much moisture may cause staining...