Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Operation (Refer to Figure 3)........................................................6 K. Specifications...............................................................................7 Warranty.......................................................................................8 1 A. Introduction Thank you for selecting the VBDV56, 5.6 inch Liquid Crystal Display (LCD) Monitor. This Monitor is designed to enhance the VBP5000 Video In A Bag system. The connection of the Monitor is plug and play. The VBDV56 can be used as an additional monitor or to replace a lost or damaged monitor. The VBDV56 utilizes state of the art electronics and is designed for easy portability and is constructed to provide years of reliable, trouble-free service. Please read the entire instruction manual supplied with this product prior to operation. It will assist you in installing the system properly and obtaining the best equipment performance. All manuals should be stored for later use. B. Cautions 1. Use only the approved power cable (Adapter or DIN cable) supplied with this Monitor. When the system is left unattended and unused for long periods of time, unplug it from the power source. Always disconnect the power source first and then the jack from the system. 2. Ensure that the Monitor is installed in accordance with the instructions and illustrations provided in this manual. 3. To prevent fire or electric shock, do not expose this appliance to rain, moisture or long periods of direct sunlight. Keep the unit away from sources of heat. Do not operate or store the unit close to strong magnetic fields. Do not spill or spray liquid of any kind on or in the system (this may result in a fire or electric shock). 4. To ensure proper ventilation, never cover or block the slots and openings with a cloth or other material. 5. To reduce the risk of electric shock do not remove the back cover of the unit. There are no user-serviceable parts inside. Contact qualified service personnel if your system is in need of repair. 6. When cleaning, make sure the system is unplugged from power source. 2 C. Contents ITEM 1. 5.6" LCD Monitor 2. DIN Cable 3. AC to DC Power Adapter 4. Cigarette Lighter Adapter 5. 5.6" LCD Monitor Pouch P/N 136C3435 112-3092136-1830136-1831126-1175 QTY. 1 1 1 1 D. Positioning the Monitor Option 1 Vehicle Headrest (Refer to Figure 1) Figure 1 Slide the Monitor into the pouch, feed the bottom piece of the pouch into the long slot at the bottom of the Monitor and attach the Velcro strap to fasten the Monitor in the pouch. Then loop the strap of the pouch around the headrest in the vehicle, and pull the end of the strap while holding the buckle until the pouch is tightly secured. Option 2 Flat Surface (Refer to Figure 2) Figure 2 Rotate the base of the Monitor backward and place it on a flat surface. Adjust the screen for a proper viewing angle. This can be done with the Monitor inside or outside the pouch. 3 E. Controls, Indicators, and Connectors (Refer to Figure 3) MONITOR RIGHT SIDE 1) Brightness UP/DOWN Thumbwheel 2) Volume UP/DOWN Thumbwheel 3) Headphone Input # 2 4) Headphone Input # 1 Right Side MONITOR FRONT SIDE 5) REMOTE CONTROL SENSOR 6) DVD/AV and VCP SELECT Switch Front Side MONITOR LEFT SIDE 7) POWER ON/OFF BUTTON (Monitor) 8) RIGHT AUDIO IN (Monitor) 9) LEFT AUDIO IN (Monitor) 10) VIDEO IN (Monitor) 11) MONITOR JACK (Input) 12) DC 12V INPUT (Monitor) Left Side F. Powering the Unit Option 1 Indoor Power (Refer to Figure 4) Figure 4 Using the AC/DC adapter supplied with the VBDV56, plug the connector end into the DC 12V IN jack on the side of the Monitor. Plug the AC/ DC adapter into a 120V AC power receptacle. This can be done with the Monitor inside or outside the pouch. 4 Option 2 Vehicle Power (Refer to Figure 5) Figure 5 Using the supplied cigarette lighter adapter, plug the connector end into the DC 12V IN jack on the side of the Monitor. Plug the cigarette lighter adapter into the cigarette lighter socket. NOTE: When the VBDV56 is connected to the VBP5000 using the supplied DIN cable, there is no need for another power source to be connected to the DC 12V IN jack located on the Monitor. G. Connecting the Monitor (VBDV56) Option 1 Using Two Monitors (Refer to Figure 6) *Optional Second Video Monitor Part # VBDV56 Figure 6 5 Using the DIN cable supplied with the VBDV56, connect one end of the DIN cable to the Monitor Port (Input) located on the side of the Monitor. Connect the other end of the DIN cable to any Monitor Port (Output) on the VBP5000. When the VBP5000 is operational, audio/video signals, power (12 Volts DC) and Infrared control signals are routed through the DIN cable to the Monitor. Since the Monitor is deriving power from the VBP5000, there is no need for another power source to be connected to DC 12V IN jack located on the Monitor. H. Using External Audio/Video Sources (Refer to Figure 7) With power applied to the Monitor, plug the video output from an auxiliary source such as camcorder, Vid...
Otros modelos de este manual:Monitores - VBDV56 (68 kb)