Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
• If the CD compartment is not loaded with a CD/ MP3-CD or the CD/MP3-CD is unreadable, the message “NO PLAY” will be blinking. •For MP3-CD, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. •For MP3-CD, “A” on the display represents ALBUM. • For MP3-CD, the total album number on the display indicates the number of all the albums recorded in the MP3-CD. Playing a normal disc 1 Press 6 button (6 PLAY/PAUSE button on the remote control) to start playback. The track number and elapsed playing time of the current track appear on the display. To i nterrupt playback, press 6 button (6 PLAY/PAUSE button on the remote control). The playing time will start flashing. To resume playback press 6 button (6 PLAY/ PAUSE button on the remote control) again. 2 To stop playback, press 7 button. Selecting a desired track/passage To select a desired track Press 4 or . button (4 or . SEARCH/ SKIP/TUNING button on the remote control) repeatedly until the desired track appears on the display. • If playback is stopped, press 6 button (6 PLAY/PAUSE button on the remote control) to start playback. •The digit buttons (0~9) on the remote control can also be used to select a track. Press the digit buttons as shown below: To select track 2 : 2 and ENTER To select track 23 : 2, 3 and ENTER To select track 120 (MP3-CD only) : 1, 2 and 0 To search for a particular passage during playback Press and hold 4 or . button (4 or . SEARCH/SKIP/TUNING button on the remote control) and released it when the desired passage is located for CD. Selecting a desired album/file (For MP3-CD only) To select a desired album Press p.call/album + or – button on the unit until the desired album number appears on the display. •“Axxx xxx” will appear on the display. “Axxx” indicates album number and ”xxx” indicates the file number. To select a desired file Press 4 or . button (4 or . SEARCH/ SKIP/TUNING button on the remote control) repeatedly until the desired file from the current album appears on the display. •“Axxx xxx” will appear on the display. “Axxx” indicates album number and ”xxx” indicates the file number. •The digit buttons (0~9) on the remote control can also be used to select a file. continued to next page 9 EN ENGLISH Using the CD/MP3-CD Using the CD/MP3-CD To search a desired file by file name 1 Press FILE SEARCH button on the remote control. 2 Press the digit buttons to enter the first character of the file name you wish to search and press ENTER button. Repeat this procedure to enter the rest of the file name. 3 Press FILE SEARCH button on the remote control. The icon “FILE SEARCH” will appear on the display. If the unit finds an appropriate file, the file name will be scrolled on the display. If there is no appropriate file, “NO FILE” will be appeared. 4 Press 6 button (6 PLAY/PAUSE button on the remote control) to start playback. Programming tracks Programming tracks of a disc is possible when playback is stopped. Up to 60 tracks can be stored in the memory in any order. 1 In stop mode, press program button on the unit (PROGRAM button on the remote control) to enter program setting. The icon “PROGRAM” and “– – P–01” will appear on the display. “– –” indicates track number of the CD and “P–01” indicates program number. 2 Press 4 or . button (4 or . SEARCH/ SKIP/TUNING button on the remote control) to select the desired track. The digit buttons (0~9) on the remote control can also be used to select tracks. The icon “PROGRAM” and program number will start flashing. 3 Press program button on the unit ( PROGRAM button on the remote control) to store the selected track. The track number returns to “– –” and the next program number will appear on the display. 4 Repeat steps 2 to 3 to select and store other desired tracks in this way. The icon “PROGRAM” will appear on the display and “FULL” will start flashing if you attempt to program more than 60 tracks. Press program button on the unit ( PROGRAM button on the remote control) in stop mode to review the program sequence. 5 Press 6 button (6 PLAY/PAUSE button on the remote control) to play the programmed tracks. If you press repeat button on the unit (REPEAT button on the remote control) during programmed playback, the current track or all programmed tracks will be played repeatedly. The icon “REPEAT” or “REPEAT ALL” and the icon “PROGRAM” will appear on the display. 6 Press 7 button once to stop program playback or twice to clear the program. The icon “PROGRAM” will disappear from the display. Programming files (For MP3-CD only) Programming files of a disc is possible when playback is stopped. Up to 60 files can be stored in the memory in any order. 1 In stop mode, press program button on the unit (PROGRAM button on the remote control) to enter program setting. The icon “PROGRAM” and “– – – P–01” will appear on the display. “– – –” indicates file number of the MP3-CD and “P–01” indicates program number. 10 EN Using the CD/MP3 2 Press p.call/album + or...