Votos - 4, Puntuación media: 4.5 ( )

Fabricar: Kenwood Tamaño del archivo: 2.08 mb Nombre del archivo: Idioma del manual:

(page 11) Timer playback 1 Press the ON/STANDBY button to turn the power on 2 Press the CD, TUNER (BAND), TAPE (A/B) or VIDEO/AUX button to select the desired function, and then adjust the sound volume using the VOLUME CONTROL. 3 Press the TIMER button repeatedly until “ ” is displayed. 4 Press the TUNING/TIME (%UP or fiDOWN) button to set the hour start time, then press the MEMORY/SET button. 5 Press the TUNING/TIME (%UP or fiDOWN) button to set the minute start time, then press the MEMORY/SET button. • The unit will enter the standby mode automatically, and the STANDBY/TIMER indicator will light up. 6 When the preset time is reached, the timer playback will start. • The volume will increase gradually. Notes : • When performing timer playback using an external unit connected to the VIDEO/AUX socket, only the power of the main unit will be turned off automatically. (The power of the external unit will not be turned off.) • If you select CD or TAPE, the unit will enter the standby mode after the playback. If you select TUNER or VIDEO/AUX, it will enter the standby mode one hour after the timer playback starts. TUNER (BAND) CD TAPE (A/B) BAND / TUNER CD POWER TAPE (A/B) TIMER MEMORY/ SET VOLUME CONTROL TUNING/ TIME (%UP fiDOWN) VIDEO / AUX VOLUME MEMORY /SET TIMER TUNING/TIME (fi %) 4 5 ON/ STANDBY VIDEO/AUX STANDBY/TIMER 33 EN MEMORY /SET TIMER TUNING/TIME (fi %) TUNER (BAND) VIDEO / AUX POWER VOLUME 3 REC 4 REC REC 5 REC Timer recording 1 Press the ON/STANDBY button to turn the power on. • Load a cassettle for recording into the TAPE B cassette compartment. 2 Press the TUNER (BAND) or VIDEO/AUX button to select the desired function, and then adjust the sound volume using the VOLUME CONTROL. 3 Press the TIMER button repeatedly until “ REC” is displayed. 4 Press the TUNING/TIME (%UP or fiDOWN) button to set the hour start time, then press the MEMORY/SET button. 5 Press the TUNING/TIME (%UP or fiDOWN) button to set the minute start time, then press the MEMORY/SET button. • The unit will enter the standby mode automatically, and the STANDBY/TIMER indicator will light up. 6 When the preset time is reached, the timer recording will start. • The volume will increase gradually. 7 When the recording tape reaches its end, the timer recording will end, and the unit will enter the standby mode. To cancel timer operation : Press the ON/STANDBY button to turn the power on. To change the programmed contents : Start again from step 1. Note : • Once the time is set, the setting will be retained until a new time is entered. STANDBY/TIMER ON/ STANDBY VIDEO /AUX TUNER (BAND) TIMER MEMORY/ SET VOLUME CONTROL TUNING/ TIME (%UP fiDOWN) 34 EN 2 3 TIMER MEMORY/ SET TUNING/TIME (%UP fiDOWN) MEMORY /SET TIMER TUNING/TIME (fi %) 2 3 TIMER MEMORY/ SET TUNING/TIME (%UP fiDOWN) MEMORY /SET TIMER TUNING/TIME (fi %) Sleep operation The radio, compact disc and cassette deck can be turned off automatically. 1 Play back the desired sound source. 2 Press the TIMER button repeatedly until “ ” is displayed. To change the sleep time : Whilst the sleep time is displayed, press the TUNING/TIME (%UP or fiDOWN) button to adjust the time. (Maximum : 3 hours - Minimum : 1 minute) The amount of sleep time can also be changed during the sleep operation. • 3 hours - 5 minutes = 5 -minutes interval • 5 minutes - 1 minute = 1 -minute interval 3 Press the MEMORY/SET button. 4 The unit will enter the standby mode automatically after the preset sleep time has elapsed. Note : • Once the sleep timer is set, it will remain the same until the setting is changed. To confirm the remaining sleep time : Press the TIMER button. To cancel the sleep operation : Press the ON/STANDBY button to enter the standby mode. 35 EN USING EXTERNAL UNITS To the line output socket RCA cord Video/Auxiliary (Audio signal) input To listen to or record signals from external sources through this unit : 1 Use a separately available RCA cord to connect the desired external unit to the VIDEO/AUX sockets. (red = right channel, white = left channel) • When using video equipment (Laser Disc player or VCR), be sure to connect the audio output to this unit and the video output to a television. 2 Press the ON/STANDBY button to turn the power on. 3 Press the VIDEO/AUX button. 4 Operate the external unit. 5 To record the sound from the external unit, perform steps 2 -4 of the “Recording from the built-in radio” section on page 31. Note : • To prevent hum interference, do not place this unit near a television receiver. Headphones • Before plugging in or unplugging the headphones, make sure the volume level is reduced. • Be sure your headphones have a 3.5mm (1/8”) diameter plug and are between 16 . and 50 . impedance. The recommended impedance is 32 .. • When headphones are connected, the speakers are disconnected automatically. Adjust the VOLUME CONTROL for the desired volume. 36 EN RESETTING THE MICROCOMPUTER SOUND MODEON/ STANDBY 7 STOP TRANSPORTING THE UNIT Reset the microcomputer under the followi...

Descargar ahora

Introduzca dos números de la imagen: