Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Tip ••In Eco Standby mode, time is displayed for 15 minutes. Select repeat/shuffle play options 1 During play, press REPEAT/SHUFFLE repeatedly to select a repeat option or the shuffle play mode. • REP: the current track is played repeatedly. • REP ALL: all tracks are played repeatedly. • REP ALB: all tracks in this album are played repeatedly. • SHUF: all tracks are played randomly. 2 To resume normal play, press REPEAT/SHUFFLE repeatedly until no option is displayed. English EN 6 Adjust sound Adjust volume During play, press VOL +/- to increase/decrease the volume. Select a preset sound effect During play, press DSC repeatedly to select: • [ROCK] (rock) • [JAZZ] (jazz) • [CLASSIC] (classic) • [POP] (pop) Enhance bass During play, press DBB to turn on or off dynamic bass enhancement. »»If DBB is activated, DBB is displayed. Mute sound During play, press to mute/unmute sound. EN 7 Other features Set the sleep timer This unit can switch to standby automatically after a set period of time. When the unit is turned on, press SLEEP repeatedly to select a set period of time (in minutes). »»When sleep timer is activated, the display shows [SLEEP](sleep) . To deactivate sleep timer Press SLEEP repeatedly until “OFF” is displayed. »»When sleep timer is deactivated, [SLEEP](sleep) disappears on the display. Set the alarm timer This unit can be used as an alarm clock. The DISC, TUNER, USB or iPhone/iPod/iPad is activated to play at a preset time. 1 Ensure that you have set the clock correctly. 2 Press and hold TIMER. 3 Press SOURCE to select a source. 4 Press TIMER to confirm. »»The hour digits are displayed and begin to blink. 5 Press / to set the hour. 6 Press TIMER to confirm. »»The minute digits are displayed and begin to blink. 7 Press / to set the minute. 8 Press TIMER to confirm. »»The timer is set and activated. Activate and deactivate the alarm timer Press TIMER repeatedly to activate or deactivate the timer. »»If the timer is activated, the display shows . »»If the timer is deactivated, disappears on the display. Note ••If DISC/USB/iPhone/iPod/iPad source is selected and the track cannot be played, tuner is activated automatically. Play from external audio device You can play from an external audio device such as MP3 player through this unit. 1 Connect the audio device. • For audio device with red/white audio output sockets: Connect a red/white audio cable (not supplied) to the AUX-IN sockets and to the audio output sockets on the audio device. • For audio device with headphone sockets: Connect the supplied MP3-Link cable to the MP3-LINK socket and to the headphone socket on the audio device. 2 Press SOURCE to select MP3- LINK/AUX-IN source. 3 Play the device. Adjust display brightness Press DIM repeatedly to select different levels of display brightness: • High brightness • Mid brightness • Low brightness English EN 8 Product information Note ••Product information is subject to change without prior notice. Specifications Amplifier Total output power 2 x 60 W RMS Frequency response 80 Hz - 16 kHz, ± 3 dB Signal to noise ratio > 60 dB MP3 link input 0.5 V RMS 20 k Disc Laser type Semiconductor Disc diameter 12 cm /8 cm Support disc CD-DA, CD-R, CD-RW, MP3-CD, WMA-CD Audio DAC 24 Bits / 44.1 kHz Total harmonic distortion < 1.5% Frequency response 60 Hz -16 kHz (44.1 kHz) Signal to noise ratio > 55 dBA Tuner Tuning range FM: 87.5 - 108 MHz Tuning grid 50 KHz Number of presets 20 Speakers Speaker impedance 2 x 60 W, 4 OHM General information AC power 220-230V / 50Hz Operation Power Consumption 60 W Standby Power Consumption < 12 W Eco Power Standby Power Consumption < 0.5 W USB Direct Version 1.1 Dimensions - Main Unit (W x H x D) - Speaker 239 x 141.5 x 230 mm 142 x 307 x 230 mm Weight - Main Unit - Speaker - Package 1.92 kg 2.55 kg x 2 1.8 kg USB playability information Compatible USB devices: • USB flash memory (USB 1.1) • USB flash players (USB 1.1) • memory cards (requires an additional card reader to work with this unit) Supported formats: • USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 bytes) • MP3 bit rate (data rate): 32-320 Kbps and variable bit rate • WMA v9 or earlier • Directory nesting up to a maximum of 8 levels • Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • ID3 tag v2.0 to v2.3 • File name in Unicode UTF8 (maximum length: 16 bytes) EN Supported MP3 disc formats • ISO9660, Joliet • Maximum title number: 999 (depending on file name length) • Maximum album number: 99 • Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz • Supported Bit-rates: 32~320 (kbps), variable bit rates Maintenance Clean the cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Clean discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. • Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic...