Votos - 3, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• You can switch from another source to the CD player and start playing a CD just by pressing CD (Por the DISC 1 – 3 buttons (Automatic Source Selection). • If there is no CD in the player, “CD NO DISC” appears in the display. • When a disc tray holding a CD is selected (or playing), the DISC 1 – 3 button for that tray lights green. When all disc trays are empty, the DISC 1 – 3 buttons all light green. Recording a CD — CD Synchro Recording The CD SYNC button lets you record from a CD to a tape easily. You can use a TYPE I (normal) tape. 1/u TAPE B 9 DISC SKIP 25 (power) p 4 13 1 Press ¤and insert a blank tape into deck B. With the side you want to record facing forward 2 Press 6and place a CD. Then press again to close the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP repeatedly so that it lights green. With the label side up. When you play a single CD, place it on the inner circle of the tray. 3 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. The indicator on TAPE B ((for front side) lights up. 4 Press EDIT/DIRECTION repeatedly to select Ato record on one side. Select § (or RELAY) to record on both sides. 5 Press P PAUSE. Recording starts. To stop recording Press p. Tips • If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing CD SYNC in step 3. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. Note You cannot listen to other sources while recording. Basic Operations Listening to the radio –– Preset Tuning Preset radio stations in the tuner’s memory first (see “Step 3: Presetting radio stations”). 1 STEREO/ 1/u 2 MONO (power) – + VOLUME =+ ( ( ( Pp0) 1/u (power) 2 1 VOL +/– 1 Press TUNER/BAND repeatedly until the band you want appears in the display. The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive. Every time you press the button, the band changes as follows: 2 band model: FM .AM 3 band model: FM nMW nLW n 2 Turn the jog dial (or press = or +on the remote) to tune in the desired preset station. Turn counter-Turn clockwise clockwise (or press + (or press = on the remote) on the remote) for higher for lower preset preset numbers. numbers. TUNED STEREO VOLUME ALL DISCS MHz Preset number Frequency To Do this Turn off the radio Press 1/u(power). Adjust the volume Turn VOLUME (or press VOL +/– on the remote). To listen to non-preset radio stations Automatic tuning Press and hold + or – in step 2 until the frequency indication starts to change, then release it. Manual tuning Press + or – repeatedly in step 2 to tune in the station. Tips • Pressing TUNER/BAND when the power is off automatically turns the power on and tunes in the last received station (One Touch Play). • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • When an FM program is noisy, press STEREO/MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. • To improve broadcast reception, reorient the supplied antennas. Recording from the radio You can record the radio program on a tape by calling up a preset station. You can use a TYPE I (normal) tape. 1/u 4 TAPE B 9p 1 (power) Basic Operations 5 – 2 + 36 1 Press TUNER/BAND to select the band you want. 2 Turn the jog dial to tune in a preset station. Turn counter- Turn clockwise clockwise (or (or press + press = on the remote) on the remote) for higher for lower preset preset numbers. numbers. VOLUME TUNED STEREO ALL DISCS MHz Preset number Frequency continued Recording from the radio (continued) 3 Press ¤and insert a blank tape into deck B. With the side you want to record facing forward 4 Press rREC. Deck B stands by for recording. 5 Press EDIT/DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 6 Press PPAUSE. Recording starts. To stop recording Press p. Tips • If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing r REC in step 4. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • To record non-preset stations, use + and – in step 2 to tune in the desired station. • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Playing a tape You can use a TYPE I (normal) tape. To select either deck A or B, press DECK A (or DECK B (on the remote. 1/u (power) 3 pP PAUSE Jog dial 0)VOLUME1 2 1 = (Pp( ( 3 P 1/u (power) p =/+ 0/) 3 VOL +/– Tips 1 Press ¤and insert a recorded tape • Pressing TAPE A (or TAPE B) (or 9when the in deck A or B. power is off automatically turns the power on and starts tape playback if there is ...
Otros modelos de este manual:estéreo - MHC-GRX3 (425.88 kb)
estéreo - MHC-R300 (425.88 kb)
estéreo - MHC-R500 (425.88 kb)