Votos - 5, Puntuación media: 3.8
(
)
)
|
Fotos y especificaciones Sony CMT-FX300I |
Resumen del manual
press .. right volumes are unbalanced. .Bundle the antenna cables using commercially available service facility. 160 GB (2007) .album or folder name (“ ”) during normal play. (video) 1st generation .total playing time and total number of tracks on the CD-DA 3 Press ./.. repeatedly to select “PLAY SEL,” and .Place the speakers as symmetrically as possible. cord clips, for example, and adjust the cable lengths. disc (only when normal play mode is selected and the player is On placement .. .Connect only the supplied speakers. stopped). then press .Do not place the system in an inclined position or in To improve tuner reception .total number of folders (albums) on the MP3 disc (only when Severe hum or noise. locations that are extremely hot, cold, dusty, dirty, or To cancel the timer normal play mode is selected and the player is stopped). Turn off CD player power by using the system’s power humid or lacking adequate ventilation, or subject to Repeat the same procedure as above until “OFF” appears .Move the system away from sources of noise. .volume label if it exists on the MP3 disc. management function. By default, CD player power is vibration, direct sunlight or a bright light. iPod nano in step 3, and then press .. .Connect the system to a different wall outlet. turned on. Notes on the display information .Be careful when placing the unit or speakers on 3rd generation iPod nano .Install a noise filter (available separately) to the power Use buttons on the unit to turn off the CD player power. .Characters that cannot be displayed appear as “_”. To change the setting surfaces that have been specially treated (for example, (video) iPod classic cord. 2nd generation .The following are not displayed; Start over from step 1. 1 Press FUNCTION . repeatedly to select the CD with wax, oil, polish) as staining or discoloration of the 80 GB (aluminum) .total playing time for an MP3 disc. function. surface may result. The remote does not function. .remaining playing time for an MP3 file. Notes for the iPod user .If the system is brought directly from a cold to a warm .The following are not displayed correctly; . Make sure the iPod is not playing when using the Play Timer. .Remove any obstacles between the remote and the 2 Press .... to turn off the system. location or is placed in a very damp room, moisture .elapsed playing time of an MP3 file encoded using VBR (variable . The Play Timer may not be activated depending on the status of the remote sensor . on the unit, and position the unit bit rate). connected iPod. away from fluorescent lights. 3 After “STANDBY” stops flashing, press DISPLAY . may condense on the lens inside the CD player, and to display the clock, and then press ....while .folder and file names that do not follow either the ISO9660 cause the system to malfunction. In this situation, .Point the remote at the system’s sensor. Level 1, Level 2 or Joliet in the expansion format. Tip holding down .., until “CD POWER OFF” appears. remove the disc, and leave the system turned on for The Play Timer setting remains as long as the setting is not cancelled .Move the remote closer to the system. .The following are displayed; With CD player power turned off, access time is about an hour until the moisture evaporates. manually. iPod nano .remaining playing time for a track. increased. To turn on CD player power, repeat the iPod iPod 1st generation version 2 tags are used (ID3 version 2 tag information display has procedure until “CD POWER ON” appears. 5th generation 4th generation .ID3 tag information for MP3 files when ID3 version 1 and CD/MP3 player On heat buildup .Heat buildup on the unit during operation is normal priority when both ID3 version 1 and version 2 tags are used for a (video) (color display) The sound skips, or the disc will not play. and is not cause for alarm. single MP3 file). To reset the system to factory settings .Wipe the disc clean, and replace it. If the system still does not operate properly, reset the .up to 32 characters of ID3 tag information using uppercase letters .Do not touch the cabinet if it has been used (A to Z), numbers (0 to 9), and symbols (. $ % ’ ( ) * + , – . / < = > .Move the system to a location away from vibration (for continuously at a high volume because the cabinet may @ [ \ ] _ ` { | } ! ? ^ ~). system to factory settings. example, on top of a stable stand). have become hot. Use buttons on the unit to reset the unit to its factory .Move the speakers away from the system, or place them .Do not obstruct the ventilation holes. default settings. on separate stands. At high volume, speaker vibration may cause the sound to skip. 1 Disconnect and reconnect the power cord, and then On the speaker system iPod mini turn on the system. This speaker system is not magnetically shielded, and iPod Play does not start from the first track. the picture on nearby TV sets may become magnetically 4th generation 2 While holding down FUNCTION .and + ., .Return to Normal Play by pressing P...