Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
your USB device. Change DISPLAY . repeatedly when the The Play Timer setting remains as long as the setting is not cancelled loaded a disc that cannot be played. If there is no improvement, move the speakers far away .Set the “EQ” setting of the iPod to “Off ” or “Flat.” manually. .USB storage devices formatted with file systems other information on system is on. NoMEMORY : The memory selected for playback has no from the TV. Note on charging the USB device with this system than FAT16 or FAT32 are unsupported.* You cannot use the system as a battery charger in the following cases; the display* The remote does not function. memory media inserted in the USB device. Troubleshooting .If you use a partitioned USB storage device, only files Cleaning the cabinet .when a function other than the USB function is selected. Check the clock DISPLAY . when the system is off. .Make sure the iPod is connected securely. NO STEP : All of the programmed tracks have been on the first partition can be played. Clean this system with a soft cloth slightly moistened .when the system is off. when the system The clock is displayed for 8 seconds. .Make sure the iPod is updated with the latest software. erased. .Files that are encrypted or protected by passwords, etc. with a mild detergent solution. Do not use any type is off If not, update the iPod before using with the system. NO SUPPORT : An unsupported USB device is cannot be played back. of abrasive pad, scouring powder, or solvent, such as connected. iPod mini * For example, you can view CD/MP3 disc information or the USB * This system supports FAT16 and FAT32, but some USB storage thinner, benzine, or alcohol. The iPod cannot be charged. iPod device information, such as; 1 Make sure the power cord and speaker cords are devices may not support all of these FAT. For details, see the NO TRACK : Playable file on the USB device is not loaded Creating your own program 4th generation .track or file number during normal play. correctly and firmly connected. .Make sure the iPod is connected securely. operation manual of each USB storage device or contact the in the system. (Program Play) .track or file name (“ ”) during normal play. .Make sure that a function other than the USB function manufacturer. NOT USED : You tried to perform a specific operation 2 Find your problem in the checklist below, and take .artist name (“ ”) during normal play. is selected. under conditions where that operation is prohibited. USB section the indicated corrective action. .album or folder name (“ ”) during normal play. Supported bit rate: .total playing time and total number of tracks on the CD-DA If the issue persists, contact your nearest Sony dealer. Specifications MP3 (MPEG 1 Audio Layer-3): 32 kbps . 320 kbps, VBR 1 Select the CD or USB function. .You can use the system as a battery charger for iPod Tuner OVER : You have reached the end of the disc while Press FUNCTION +/.. repeatedly. only when the system is on. pressing .. during playback or pause. disc (only when normal play mode is selected and the player is Sampling frequencies: Severe hum or noise, or stations cannot be Main unit stopped). PUSH STOP : You pressed PLAY MODE . during MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz 2 Select the play mode. (USB) port: Type A, maximum current 500 mA “PROTECT” appears. received. (“TUNED” or “ST” flashes on the Amplifier section If “PROTECT” appears on the display .total number of folders (albums) on the MP3 disc or the USB playback. Press PLAY MODE . repeatedly until “PGM” device (only when normal play mode is selected and the player or .A problem has been detected with the level of electrical display.) European model: Speaker Immediately unplug the power cord, and check the TIME NG : The Play Timer start and end times are set to DIN power output (rated): 4 watts + 4 watts (4 ohms at 1 kHz, DIN) Speaker system: Full range, 8 cm dia., cone type the USB device is stopped). appears while the player is stopped. current from the iPod connector. Turn off the system .Connect the antenna properly. following items after “PROTECT” disappears. the same time. Continuous RMS power output (reference): 5 watts + 5 watts (4 ohms at Rated impedance: 4 ohms .volume label if it exists on the MP3 disc or the USB device (only and remove the iPod from the iPod connector. Make .Find a location and an orientation that provide good 1 kHz, 10% THD) Dimensions (W/H/D): Approx. 148 mm . 240 mm . 127 mm .Are the + and . speaker cords short-circuited? 3 Select the desired track or file number. when normal play mode is selected and the player or the USB sure there is no problem with the iPod. If this display Music power output (reference): 9 watts + 9 watts Mass: Approx. 1.23 kg net per speaker reception, and then set up the antenna again. device is stopped). .Is anything blocking the ventilation holes of the Other models: Press ../.. repeatedly until the desired pattern persists, contact your nearest Sony dealer. Precautions General DIN...