Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Saving the power in standby mode Press DISPLAY repeatedly when the system is off. Each time you press the button, the system switches cyclically as follows: Demonstration t Clock display t Power Saving Mode Tips • ?/1 indicator lights up even in the Power Saving Mode. • The timer works even in the Power Saving Mode. Note You cannot set the time in the Power Saving Mode. To cancel the Power Saving Mode Press DISPLAY once to show the demonstration or twice to show the clock display. Getting Started CD CD 1 Press CD. 2 Press PLAY MODE on the remote repeatedly until the mode you want appears in the display. Loading a CD 1 Press Z OPEN/CLOSE. The disc tray opens. 2 Place a CD with the label side up on the disc tray. When you play a CD single (8 cm CD), place it on the inner circle of the tray. To insert additional discs, press DISC SKIP EX-CHANGE to rotate the disc tray. 3 Press Z OPEN/CLOSE to close the disc tray. Playing a CD —Normal Play/Shuffle Play/Repeat Play This system lets you play the CD in different play modes. Disc tray number Disc presence Track Playing time indicator number Select To play ALL DISCS All CDs in the disc tray (Normal Play) continuously. 1DISC The CD you have selected (Normal Play) in original order. ALL DISCS The tracks on all CDs in SHUF random order. (Shuffle Play) 1DISC SHUF The tracks on the CD you (Shuffle Play) have selected in random order. PGM (Program Play) The tracks on all CDs in the order you want them to be played (see “Programing CD tracks” on page 11). Find a point in a track During play, press and hold M (to go forward) or m (to go back). Release it when you find the desired point. Select a CD in Press DISC 1 – 3 or DISC SKIP stop mode EX-CHANGE (or D.SKIP on the remote). 3 Press H (or N on the remote). Other Operations To Do this Stop play Press x. Pause Press X. Press again to resume play. Select a track During play or pause, press > (to go forward) or . (to go back). To Do this Switch to CD Press DISC 1 – 3 (Automatic function from Source Selection). However, if a another source CD is used in a program, play does not start even if you press CD 1 – 3. Remove a CD Press Z OPEN/CLOSE. Exchange other Press DISC SKIP EX-CHANGE. CDs while playing Play repeatedly Press REPEAT on the remote (Repeat Play) during play until “REP” or “REP 1” appears. REP*: For all the tracks on the CD up to five times. REP 1**: For a single track only. To cancel playing repeatedly, press REPEAT until “REP” or “REP 1” disappears. * You cannot select “REP” and “ALL DISCS SHUF” at the same time. ** When you select “REP 1”, that track is repeated endlessly until “REP 1” is canceled. Note The play mode cannot be changed while playing a disc. To change the play mode, press x first to stop play. Programing CD tracks —Program Play You can make a program of up to 32 tracks from all the CDs in the order you want to play them. 1 Press CD, then place a CD. 2 Press PLAY MODE on the remote repeatedly until “PGM” appears in the display. 3 Press one of DISC 1 – 3 to select a CD. To program all the tracks on a CD at once, proceed to step 5 with “AL” displayed. 4 Press . or > until the desired track appears in the display. Total playing time Disc tray number (including selected track) CD Track number 5 Press ENTER on the remote. The track is programed. The program step number appears, followed by the total playing time. 6 Program additional discs or tracks. To program Repeat steps Other discs 3 and 5 Other tracks on the 4 and 5 same disc Other tracks on other 3 to 5 discs 7 Press H (or N on the remote). Other Operations To Do this Cancel Program Press PLAY MODE on the Play remote repeatedly until “PGM” and “SHUF” disappear. Clear a track from Press CLEAR on the remote in the end stop mode. Clear the entire Press x once in stop mode or program twice during play. continued Tuner Tuner Programing CD tracks (continued) Tips • The program you made remains after Program Play finishes. To play the same program again, press CD, then press H (or N on the remote). • “--.--” appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over. Using the CD display You can check the remaining time of the current track or the entire CD. Press DISPLAY repeatedly. During normal play Playing time of the current track t Remaining time of the current track t Remaining time of current CD t Clock display (for eight seconds) t Effect status In stop mode During Program Play mode when there is a program: The last track number of the program and the total playing time t Total number of programed tracks (for eight seconds) t Clock display (for eight seconds) t Effect status Presetting radio stations You can preset up to 20 stations for FM and 10 stations for AM. 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press and hold m or M (or TUNING – or + on the remote) until the frequency indication starts to change, then release it. Scanning stops automatically when the system tunes in...
Otros modelos de este manual:estéreo - MHC-DX10 (231.39 kb)
estéreo - MHC-RG20 (231.39 kb)
estéreo - MHC-RG30T (231.39 kb)