Votos - 5, Puntuación media: 3.4
(
)
)
|
Resumen del manual
(go back) qj > (go forward) qj X (pause) qj H (play) qj x (stop) qj m (rewind) qk Z (deck A) wa Remote Control 12 34 5 6 wa 7 w; 8 ql 9 qk q; qj qa qh qs qg qd qf CD ql (10 – 12, 15) ON/OFF qh (17) BUTTON DESCRIPTIONS CLEAR w; (11) PLAY MODE wa (10, 11) CLOCK/TIMER SELECT 2 PRESET +/– 5 (13) ?/1 (power) 4 (16, 19) REPEAT 8 (11) M (fast forward) 5 CLOCK/TIMER SET 3 (9, 16, SLEEP 1 (18) . (go back) 5 18) STEREO/MONO 8 (13) > (go forward) 5 DISPLAY 6 (12) SURROUND qa (17) X (pause) 5 D.SKIP 7 (10) TAPE A/B 9 (14, 15) N (play) 5 ENTER qg (9, 11 – 13, 16, 18, TUNER MEMORY qj (12, 13) m (rewind) 5 19) TUNER/BAND qk (12, 13) x (stop) 5 EQ +/– qf (17) TUNING +/– 5 (12, 13) GAME 0 (18 – 20) VOL +/– qs GROOVE qd (17) Parts Identification Getting Started Getting Started Hooking up the system Perform the following procedure 1 to 5 to hook up your system using the supplied cords and accessories. Surround speaker (Right)* FM antenna AM loop antenna Surround speaker (Left)* Front speaker (Left) 35421Front speaker (Right) * MHC-RG4SR only 1 Connect the front speakers. 2 Connect the surround speakers. Connect the speaker cords to the SPEAKER (MHC-RG4SR only) jacks as shown below. Connect the speaker cords to the SURROUND SPK OUT PUT jacks as Insert only the stripped portion shown below. R+ L + – Insert only the stripped portion Red/Solid (3) R+ L + – Red/Solid Black/Stripe (#) (3) Black/Stripe (#) 3 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Jack type A Extend the FM lead antenna AM loop antenna horizontally FM75 AM Jack type B Extend the FM lead antenna horizontally AM loop antenna AM FM75COAXIAL 4 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. 230 - 240V 220V 120V 5 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter). To connect optional components See page 19. To attach the front speaker pads Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Notes • Keep the speaker cords away from the antennas to prevent noise. • Do not place the surround speakers on top of a TV. This may cause distortion of the colors in the TV screen. • Be sure to connect both left and right surround speakers. Otherwise, the sound will not be heard. continued Getting Started Hooking up the system (continued) Positioning the speakers (MHCRG4SR only) 1 Place the front speakers at an angle of 45 degrees from your listening position. Front Front speaker speaker (L) (R) 45. Surround Surround speaker speaker (L) (R) 2 Place the surround speakers facing each other at about 60 to 90 cm above your listening position. Surround speaker 60 to 90 cm When carrying this system Perform the following procedure to protect the CD mechanism. 1 Make sure that all discs are removed from the system. 2 Press ?/1 to turn off the system. 3 Unplug the power cord. Inserting two R6 (size AA) batteries into the remote E e e E Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. Setting the time 1 Press ?/1 to turn on the system. 2 Press CLOCK/TIMER SET on the remote. Proceed to step 5 when “CLOCK” appears in the display. 3 Press . or > repeatedly to select “SET CLOCK”. 4 Press ENTER on the remote. 5 Press . or > repeatedly to set the hour. 6 Press ENTER on the remote. The minute indication flashes. 7 Press . or > repeatedly to set the minute. 8 Press ENTER on the remote. Tip If you made a mistake or want to change the time, start over from step 2. Note The clock settings are canceled when you disconnect the power cord or if a power failure occurs. Saving the power in standby mode Press DISPLAY repeatedly when the system is off. Each time you press the button, the system switches cyclically as follows: Demonstration t Clock display t Power Saving Mode Tips • ?/1 indicator lights up even in the Power Saving Mode. • The timer works even in the Power Saving Mode. Note You cannot set the time in the Power Saving Mode. To cancel the Power Saving Mode Press DISPLAY once to show the demonstration or twice to show the clock display. Getting Started CD CD 1 Press CD. 2 Press PLAY MODE on the remote repeatedly until the mode you want appears in the display. Loading a CD 1 Press Z OPEN/CLOSE. The disc tray opens. 2 Place a CD with the label side up on the disc tray. When you play a CD single (8 cm CD), place it on the inner circle of the tray. To insert additional discs, press DISC SKIP EX-CHANGE to rotate the disc tray. 3 Press Z OPEN/CLOSE to close the disc tray. Playing a CD...
Otros modelos de este manual:estéreo - MHC-DX10 (231.39 kb)
estéreo - MHC-RG4SR (231.39 kb)
estéreo - MHC-RG30T (231.39 kb)