Votos - 2, Puntuación media: 3.5
(
)
)
|
Fotos y especificaciones Sony CMT-M70 |
Resumen del manual
When the recording starts, the volume level is automatically set to the minimum. To Do this Check the settings Press TIMER SELECT on the remote repeatedly until “c REC” appears in the display. The preset items appear in turn. Turn off the timer Press TIMER SELECT on the remote repeatedly until “c REC” disappears from the display. Tip Once you set the timer, the time settings will remain in the system’s memory until you change them, even when you turn the system or the timer off. The settings that were last used will be in effect when you turn the timer on again. Notes • The system will turn on 15 seconds before the specified starting time. • If the system is turned on at the specified starting time, recording will not occur. • When you have set the Sleep Timer, the timer recording will not operate until the Sleep Timer Function is turned off. • You cannot operate the Daily Timer and the timer recording at the same time. Adjusting the sound Generating a more dynamic sound (Dynamic Sound Generator) Press DSG. Each time you press the button, the display changes cyclically as follows: DSG 2 t DSG OFF t DSG 1 Sound Adjustment 15GB Display Other Features Using the display Checking the remaining time (CD) Press DISPLAY on the remote during play. Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time of the track t Current track number and remaining playing time of the track* t Remaining playing time of the entire CD t Clock display * “– – –.– –” appears when you check the remaining playing time of a CD track whose number is 25 or over. Checking the total playing time (CD) Press DISPLAY on the remote in stop mode. Each time you press the button, the display changes cyclically as follows: Total playing time t Clock display t Current source display Falling asleep to music —Sleep Timer The Sleep Timer Function lets you specify a sleep time, after which the system stops playing and turns off automatically. You can thus fall asleep to music. Press SLEEP on the remote repeatedly. The sleep time changes as follows: AUTO* t 90MIN t 80MIN t 70MIN t … t 10MIN t OFF t AUTO* t … * The system turns off after the current CD or tape finishes playing (up to 100 minutes). The system also turns off when you manually stop the CD or tape. To Press Check the remaining SLEEP on the remote once. sleep time** Change the sleep time SLEEP on the remote repeatedly until the time you want appears. Cancel the Sleep SLEEP on the remote Timer Function repeatedly until “OFF” appears. ** You cannot check the remaining time if you select “AUTO”. Waking up to music —Daily Timer By setting the Daily Timer, you can make the system automatically turn on and off at specified times. To use this function, make sure that you have set the system clock correctly (see “Setting the clock” on page 7). 16GB 1 Prepare the music source you want to listen to when the system turns on. • CD: Load a CD. To start playing from a specific track, make a program (see “Programming the CD tracks” on page 9). • Tape: Load a tape with the side you want to play facing towards you. • Radio: Tune in the preset radio station that you want (see “Listening to the radio” on page 11). 2 Adjust the volume. 3 Press TIMER SET on the remote. 4 Press ./> on the remote repeatedly until “SET DAILY” appears in the display. “SET DAILY” scrolls and “c DAILY” appears in the display. 5 Press ENTER on the remote. “ON TIME” appears, then the hour indication flashes. 6 Set the starting time. Press ./> on the remote repeatedly to set the hour, then press ENTER on the remote. The minute indication begins flashing next. Press ./> on the remote repeatedly to set the minute, then press ENTER on the remote. “OFF TIME” appears, then the hour indication flashes again. 7 Set the stopping time by repeating step 6. 8 Press ./> on the remote repeatedly until the music source you want appears. The display changes as follows: t TUNER y CD T t TAPE T 9 Press ENTER on the remote. The starting time, the stopping time, and the music source appear in turn, then the original display returns. 10Press @/1 to turn off the system. To Do this Check the settings Press TIMER SELECT on the remote repeatedly until “c DAILY” appears in the display. The preset items appear in turn. Turn off the timer Press TIMER SELECT on the remote repeatedly until “c DAILY” disappears from the display. Tip Once you set the timer, the time settings will remain in the system’s memory until you change them, even when you turn the system or the timer off. The settings that were last used will be in effect when you turn the timer on again. Notes • The system will turn on 15 seconds before the specified starting time. • When you have set the Sleep Timer, the Daily Timer will not operate until the Sleep Timer Function is turned off. • You cannot operate the Daily Timer and the timer recording at the same time. Display/Other Features 17GB Optional Components Optional Components Hooking u...