Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
ATS002102 RevC 9/05 PP OWNER'S MANUALCP700 COMMERCIAL POWER AMPLIFIER OWNER'S MANUALCP700 COMMERCIAL POWER AMPLIFIER TABLE OF CONTENTS Introduction, Features, Applications.............................................................………………………………….3 Front Panel Description......................................................................…………………………………..…….4 Rear Panel Description......................................................................…………………………………..……..5 Input Wiring......................................................................…………………………………..…………………..7 Speaker Output Wiring...................................................................................………………………………..9 Specifi cations..........................................................................................…………………………………….15 Warranty................................................................................................……………………………………...16 SAFETY INSTRUCTIONS Please Read Carefully Before Installing or Operating This Product • Read instructions fully. • Pay attention to any and all warnings. • Connect this amplifier only to the correct operating voltage. • Do not attempt to service this unit. Only a qualified service technician should open this unit for servicing. • Warning - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. HEARING DAMAGE! All professional loudspeaker systems are easily capable of producing very high sound pressure levels. Use care with the operation of this amplifier and wear the appropriate hearing protection. Exposure to excessive sound pressure levels can cause permanent hearing damage. SHOCK HAZARD! The Atlas Sound CP700, when in operation, can produce a shock hazard at the speaker terminals. Make sure the amplifier is turned off when installing or removing connections at the speaker terminal barrier strip. After connecting the proper speaker load, REPLACE the terminal strip cover! VENTILATION Although the CP700 is fan cooled and has thermal protection circuitry, allow adequate ventilation to assure trouble free operation. When rack mounting one or more of the CP700s, install an exhaust fan in the rack to evacuate heat buildup. Consult Atlas Sound’s Technical Support at 1-800-876-3333 for advice on thermal management and help with rack selection for this product. RACK MOUNTING Although the internal output transformers are mounted close to the front panel when rack mounting the CP700, be sure the unit is adequately supported. Specifications are subject to change without notice AtlasSound.com 1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435 ©2005 ATLAS SOUND LP Printed in U.S.A. ATS002102 RevC 9/05 PP OWNER'S MANUALCP700 COMMERCIAL POWER AMPLIFIER OWNER'S MANUALCP700 COMMERCIAL POWER AMPLIFIER INTRODUCTION Congratulations and thank you for purchasing the Atlas Sound CP700 dual channel power amplifier. This product is a professional grade audio power amplifier specifically designed for demanding contractor applications and engineered to provide years of faithful service. Two independent channels driven by separate power supplies ensure maximum channel separation and ultra low distortion figures. Whether your application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the Atlas Sound CP700 is the answer for high power/low cost amplification needs. FEATURES • Independent power supplies • Soft clip limiter protection • Dual-speed, high efficiency fan cooling • Stepped attenuators mounted on the rear for security • Stereo, bridge, or parallel operating modes selectable via rear mounted switch • Balanced inputs on barrier strip and XLR connectors • Loop through feature on male XLRs, one per channel input • Short-circuit, temperature, and DC offset protection • 25V, 70.7V, 100V, and direct coupled (2,4, and 8 Ohm) outputs mounted on barrier strips with covers for safety • Toroidal output transformers provide extended high frequency response and effectively lower the electrical interference • Power-up muting APPLICATIONS The Atlas CP700 is the perfect choice for distributed paging/BGM systems, foreground music systems, and distributed sound masking applications. It is also at home in night clubs, theaters, portable sound systems, and anywhere clean high-fidelity audio amplification is needed. Specifications are subject to change without notice AtlasSound.com 1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435 ©2005 ATLAS SOUND LP Printed in U.S.A. ATS002102 RevC 9/05 PP OWNER'S MANUALCP700 COMMERCIAL POWER AMPLIFIER OWNER'S MANUALCP700 COMMERCIAL POWER AMPLIFIER FRONT PANEL DESCRIPTION Figure 1 PROTECT LIMIT SIGNAL CH-1 PROTECT POWER LIMIT SIGNAL CH-2 CP700 Commercial Power Amplifier 2 3 4 1 1. Power Switch This rocker switch supplies power to the CP700 amplifier. A red LED located above the power switch wil...