Votos - 5, Puntuación media: 4.6
(
)
)
|
Resumen del manual
.Data Entry (Controller number 6, 38) Status 2nd byte 3rd byte BnH 06H mmH BnH 26H llH n = MIDI channel number: 0H - FH (ch.1 - 16) mm, ll = the value of the parameter specified by RPN/NRPN mm = MSB, ll = LSB .Volume (Controller number 7) Status 2nd byte 3rd byte BnH 07H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Volume: 00H - 7FH (0 - 127) * Not received when the Rx Volume (EDIT:Part Parameter:Rx Volume) is OFF. * The Part Level parameter will change. .Panpot (Controller number 10) Status 2nd byte 3rd byte BnH 0AH vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Panpot: 00H - 40H - 7FH (Left - Center - Right), * Not received when the Rx Pan (EDIT:Part Parameter:Rx Pan) is OFF. * The pan parameter (EDIT:Part Parameter:Pan) will change. .Expression (Controller number 11) Status 2nd byte 3rd byte BnH 0BH vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Expression: 00H - 7FH (0 - 127) . General Purpose Controller 1 (Controller number 16) Status 2nd byte 3rd byte BnH 10H vvH n = MIDI channel number:0H - FH (ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) .Hold 1 (Controller number 64) Status 2nd byte 3rd byte BnH 40H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON * Not received when the Rx Hold-1 (EDIT:Part Parameter:Rx Hold-1) is OFF. .Portamento (Controller number 65) Status 2nd byte 3rd byte BnH 41H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON * The Portamento Sw parameter (Tone Info:Portament Sw) will change. .Sostenuto (Controller number 66) Status 2nd byte 3rd byte BnH 42H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON .Soft (Controller number 67) Status 2nd byte 3rd byte BnH 43H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON .Legato Foot Switch (Controller number 68) Status 2nd byte 3rd byte BnH 44H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON 156 MIDI-Implementation .Resonance (Controller number 71) Status 2nd byte 3rd byte BnH 47H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv= Resonance value (relative change): 00H - 7FH (-64 - 0 - +63) * The Resonanse parameter (Tone Info:Resonance) will change. .Release Time (Controller number 72) Status 2nd byte 3rd byte BnH 48H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Release Time value (relative change): 00H - 7FH (-64 - 0 - +63) * The Release Time parameter (Tone Info:Release Time) will change. .Attack time (Controller number 73) Status 2nd byte 3rd byte BnH 49H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Attack time value (relative change): 00H - 7FH (-64 - 0 - +63), * The Attack Time parameter (Tone Info:Attack Time) will change. .Cutoff (Controller number 74) Status 2nd byte 3rd byte BnH 4AH vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Cutoff value (relative change): 00H - 7FH (-64 - 0 - +63) * The Cutoff parameter (Tone Info:Cutoff) will change. .Decay Time (Controller number 75) Status 2nd byte 3rd byte BnH 4BH vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Decay Time value (relative change): 00H - 7FH (-64 - 0 - +63) * The Decay parameter (Tone Info:Decay) will change. .Vibrato Rate (Controller number 76) Status 2nd byte 3rd byte BnH 4CH vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Vibrato Rate value (relative change): 00H - 7FH (-64 - 0 - +63) .Vibrato Depth (Controller number 77) Status 2nd byte 3rd byte BnH 4DH vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Vibrato Depth Value (relative change):00H - 7FH (-64 - 0 - +63) .Vibrato Delay (Controller number 78) Status 2nd byte 3rd byte BnH 4EH vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Vibrato Delay value (relative change):00H - 7FH (-64 - 0 - +63) .Portamento Control (Controller number 84) Status 2nd byte 3rd byte BnH 54H kkH n = MIDI channel number: 0H - FH (ch.1 - 16) kk = source note number: 00H - 7FH (0 - 127) *A Note-on received immediately after a Portamento Control message will change continuously in pitch, starting from the pitch of the Source Note Number. * If a voice is already sounding for a note number identical to the Source Note Number, this voice will continue sounding (i.e., legato) and will, when the next Note-on is received, smoothly change to the pitch of that Note-on. * The rate of the pitch change caused by Portamento Control is determined by the Portamento Time value. .Effect 1 (Reverb Send Level) (Controller number 91) Status 2nd byte 3rd byte BnH 5BH vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Reverb Send Level: 00H - 7FH (0 - 127) * The Reverb Amount parameter (Tone Info:Reverb Amount) will change. .Effect 3 (Chorus Send Level) (Controller number 93) Status 2nd byte 3rd byte BnH 5DH vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv =...