Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
You can delete this unwanted silence so that the song contains only the performance itself. 1 Insert the SD memory card that you want to edit, and press the [SD CARD] button. SD becomes the audio source. 2 Use the [ ] or [ ] button to select the track you want to edit. 3 Press the [MENU] button to access the menu screen, and choose “Trim Out?” Press the [MENU] button to access the menu screen. Use the [ ] [ ] buttons to choose “Trim Out?” Press the [ENTER] button to confirm your choice. 4 Press the [ (Play)] button to play back the selected song. Number of the track you’re editing 5 When you come to the point that you want to be the end of the song (the End Point), press the [ (Record)] button. (If the song is long, you can fast-forward until you’re near the desired End Point.) Four seconds of sound following the End Point will play repeatedly. Deleted region End Point—this will be the end of the song after editing. Four seconds Plays repeatedly 6 Use the [+] or [-] button to precisely adjust the End Point. Adjust the End Point so that you no longer hear the end of the song. Button Explanation [+] button Moves the End Point backward. [-] button Moves the End Point forward. Deleting Songs from an SD Memory Card (continued) Deleting Songs from an SD Memory Card (continued) Press the [ENTER] button. 8 If you’re sure you want to proceed, press the [ENTER] button. (If you decide to cancel, press the [EXIT] button.) Progress indication The display will show “Processing...”, and the unwanted end of the song will be deleted. When the deletion is completed, you’re returned to the audio source screen. The deleted region cannot be recovered. Use this operation with caution. Note . You can’t specify End Point locations that would cause the edited song to be less than four seconds long. . The Trim Out editing process will take a certain amount of time. In general, the time will be approximately half the playback time of the song. For example, in order to edit a four- minute song, it will take approximately two minutes for the editing process to be completed. . The Trim Out editing operation requires free space equal to the size of the song you’re editing. For example, if you’re editing a five-minute song, you won’t be able to execute this operation unless you have at least five minutes of recording time remaining. . This operation cannot be performed if the SD memory card’s write protect switch (Page 25) is in the “LOCK” position. Important Advanced Listening Deleting Creating Editing AppendicesConvenientFunctionsInformation/ Display Checking /Preparations Erasing Tracks from a CD-RW Disc Deleting One Song at a Time (Only the Last Song) Erasing Tracks from a CD-RW Disc Deleting One Song at a Time (Only the Last Song) Here’s how to erase the last track recorded on a CD-RW disc. * In order to perform this operation, you’ll need the included, dedicated AC adaptor. 1 Insert the CD-RW disc that you want to edit. 2 Press the [MENU] button to access the menu screen, and choose “Erase Last?” Press the [MENU] button to access the menu screen. Use the [ ] [ ] buttons to choose “Erase Last?” Press the [ENTER] button to confirm your choice. 3 If you’re sure you want to proceed, press the [ENTER] button. (If you decide to cancel, press the [EXIT] button.) Count-down (min:sec) The display will show “Processing...”, and the last song will be deleted. During this process, a timer is displayed, counting down the time until the operation is completed. Once you delete a song, you cannot recover the recorded content. Use this operation with care. Note . You can’t erase tracks from a CD-R disc. . If you want to erase a track from a CD-RW disc that’s been finalized (Page 83), you’ll need to first remove finalization. . “Removing Finalization” (Page 78) . If you press the [-] button after Step 1, the message screen of Step 3 will appear immediately. This lets you skip having to choose a menu item. Important Erasing Tracks from a CD-RW Disc (continued) Erasing All Tracks Erasing Tracks from a CD-RW Disc (continued) Erasing All Tracks Here’s how to erase all tracks from the CD-RW disc. * In order to perform this operation, you’ll need the included, dedicated AC adaptor. 1 Insert the CD-RW disc that you want to edit. 2 Press the [MENU] button to access the menu screen, and choose “CD Erase All?” Press the [MENU] button to access the menu screen. Use the [ ] [ ] buttons to choose “CD Erase All?” Press the [ENTER] button to confirm your choice. 3 If you’re sure you want to proceed, press the [ENTER] button. Advanced Listening Deleting Creating Editing AppendicesConvenientFunctionsInformation/ Display Checking /Preparations 4 If you’re still sure you want to proceed, press the [ENTER] button. (If you decide to cancel, press the [EXIT] button.) Count-down (min:sec) The display will show “Processing,” and all songs will be deleted. During this process, a timer is displayed, counting down the time until the operation is completed. When the deletion is...