Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
* If any other message appears, follow the directions of the message. 6 When the message “Uninstallation was completed.” is displayed, click [OK] to restart Windows. Uninstalling the Driver (Mac OS X) 1 Start up Windows with all USB cables disconnected (except those for a USB keyboard and/or USB mouse, if used). 2 Close all applications before performing the uninstallation. 3 Insert the included UA-25EX Driver CD-ROM into your computer. 4 In the CD-ROM, double-click the “Driver (Mac OS X)” folder. 5 Double-click “UA25EX_Uninstaller.” 6 The screen will indicate “This uninstalls EDIROL UA-25EX driver from this Macintosh.” Click [Uninstall]. * If any other message appears, proceed as directed by that message. 7 The screen will indicate “Are you sure to uninstall the driver?” Click [OK]. 8 The “Authenticate” dialog box will appear. Enter your password, and click [OK]. 9 The screen will indicate “Uninstallation is completed.” Click [Restart] to restart your computer. * It may take some time for your computer to restart. g Can’t Install/Uninstall/Use the Driver Is the USB connector of your computer usable? Refer to the owner’s manual of your computer, and verify that the USB connector is usable. You can’t install the driver unless the USB connector is usable. Can your computer or USB hub supply enough power? Check whether the following cases might apply. • If you’re using a notebook computer that’s running on batteries, the UA-25EX might not operate stably with some computers. If so, connect your computer to its AC adaptor. • The power conservation settings of your computer may be limiting the power that is supplied to USB. Take another look at the settings of your computer. • Some bus powered USB hubs cannot be used with the UA-25EX. Use a USB hub that contains a power supply. Does your computer meet the requirements of the USB specifications? If your computer does not meet the electrical requirements of the USB specifications, the UA25EX may not operate stably. If so, you may be able to solve the problem by using a self- powered USB hub. Is the UA-25EX’s advanced driver switch turned “ON”? Turn the UA-25EX’s advanced driver switch “ON.” Did you log on to Windows with the appropriate user privileges? You must log onto Windows using one of the following user names. • A user belonging to the Administrators group (e.g., Administrator) • A user whose account type is Computer Administrator Appendix: Troubleshooting Appendix: Troubleshooting You may be unable to install the driver because of the “Driver Signing Option” setting. Check the following points, and make the appropriate setting. 1. Open the System Properties dialog box. 1. From the Windows Start menu, open the Control Panel. 2. In “Pick a category,” click “Performance and maintenance.” 3. Under “Pick a Control Panel icon,” click the System icon. * Depending on your setup, the System icon may be shown directly in the Control Panel (the Classic view). If so, double-click the System icon. 2. Click the “Hardware” tab, and then click [Driver Signing]. 3. The Driver Signing Options dialog box will appear. In the Driver Signing Options dialog box, choose “Warn” or “Ignore,” and then click [OK]. 4. Click [OK] to close the System Properties dialog box. 5. Install the driver as described in the “Installation” procedure. * After you’ve completed the installation, you can return the driver signing options setting to its original state. Was the driver installed correctly? If you are unable to use the UA-25EX even though the driver was installed, it is possible that the driver was not installed correctly. Uninstall the driver as described in “Driver Uninstallation” (p. 35), and then install the driver once again. Is the UA-25EX’s MIDI/WAVE device name shown? If the device name is not shown, close all applications that are using the UA-25EX, disconnect the USB cable from the UA-25EX, and then reconnect it. If this does not solve the problem, uninstall the driver as described in “Driver Uninstallation” (p. 35), and then install the driver once again. Appendix: Troubleshooting Appendix: Troubleshooting Was the driver installed correctly? Could the computer have entered standby (suspend) mode or hibernation while the UA-25EX was connected? If the UA-25EX does not operate correctly after your computer resumes from standby (suspend) mode or hibernation, close all applications you’re using, disconnect the USB cable from the UA-25EX, and then reconnect it. Could you have disconnected and reconnected the USB cable while using the UA-25EX? The UA-25EX may stop operating correctly if you disconnect and reconnect the USB cable during use. In this case, close all applications that are using the UA-25EX, disconnect the USB cable from the UA-25EX, and then reconnect it. On some computers, the driver will not be loaded correctly if the UA-25EX is already connected when Windows starts up, making the UA-25EX unusable via USB. In this case, connect the UA-25EX after Windows has started up. ...